Last year's hunt for a Christmas tree hunt went nothing like we planned it, so this year we were itching to get out and see what the adventure would bring. It turns out, everything went exactly as planned, perhaps making up for last year. We headed out around 10am, with three goals in mind: Test out the APRS setup. Check the clearance of the new tires as the rear of the truck flexed. Get a Christmas tree. Of course, there was a fourth goal as well - try to do all the above without @mini.turbodb asking "are we there yet?"…
Leave a CommentMonth: November 2017
I got asked a few questions about APRS, and figured that the topic would make a good post. This isn't everything there is to know about APRS (by a long shot), but it does explain things in (I hope) a way that can help clarify how various components in the system work... At any rate, here were some of the questions that got asked: I've been checking your post here turbodb and must say it's helping me get started in aprs. Very nice write up ! I'm wondering what tablet you use ? I have a windows based laptop for…
Leave a CommentHaving just installed a new ham radio setup to get APRS, I was keen to play with Kenwood TM-D710GA and Mobilinkd to track my location. So, on a few local trips, I turned everything on and waited. And waited and waited. Over the course of 30 minutes, I never got a single APRS beacon from another station. I knew something was wrong. And then I realized that the difference between my initial setup and my current situation was that the truck was on. Turning the truck off resulted in almost immediate APRS packets coming through. Crap, something is causing interference…
2 CommentsNovember 5, 2017 It wasn't all that long ago that I got my Ham radio license and installed an Icom-5100 in the truck. A great radio, it's gone now - because a great radio isn't all I need; I need a great radio that can also do APRS. What's APRS and why's it so important? Great question, let's start there! APRS is the "Automatic Packet Reporting System," a machine-parsable protocol used on a known frequency (144.390 in the US) to send all kinds of information from one ham radio to another. But the reason I care about it is that…
20 CommentsNovember 1, 2017. I've always hated the A-pillars in my truck. Actually, it's the trim I hate. And I've hated it since I first tried (and failed) to remove it several years ago to run the wire for a microphone from my head unit up to the rearview mirror. See, to remove the A-pillar trip, you also need to remove the grab handle. And for some reason, in 1997-2000 Tacoma's, the grab handle is attached with two M6 screws (no hex head) with a JIS head. That JIS head looks a lot like a Philips head, but it isn't, and…
4 Comments