Not technically my truck. Mine might be heavier.
TL;DR - the truck is heavy at 5800 lbs loaded, and I need to find a way to shed weight. That's now on the project list for this winter.
Leave a Commentescape the ordinary
Not technically my truck. Mine might be heavier.
TL;DR - the truck is heavy at 5800 lbs loaded, and I need to find a way to shed weight. That's now on the project list for this winter.
Leave a CommentTL;DR - I have oil leaking from the transfer case where the front drive shaft attaches.
Leave a CommentTL;DR - The skid plates are holding up, but the mounting strategy could have been better. For the 3rd time, I'm modifying it.
Leave a CommentTL;DR - it's been about a year and my spherical bearings are getting squeaky; time to replace them.
Leave a CommentTL;DR - Moving the resis to the top of the frame means there is no more rubbing and I have my turning radius back.
Leave a CommentTL;DR - The rear axle seal replacement seems to worked beautifully and there is no more leaking at all.
Leave a CommentTL;DR - the hard brakes lines are working fabulously and I'm happy to have installed them.
Leave a CommentAugust 27, 2019. Most of the trips I do require a full day - or more - of freeway driving just to reach the trailhead, so you can imagine my delight when we decided to do a trip on the west coast. Sort-of. At least, our meeting location was only four hours away - in the tiny little community of Mazama, WA. From there, we'd head north - to British Columbia, Canada - where we planned to run The Whipsaw Trail and then make our way north and west to Molybdenite Peak - before turning south again for the United States.…
8 CommentsWell, as I mentioned previously, our last family camping trip was both a success and a failure. I mean, the camping part was all success, but noticing that my rear axle seals were leaking when we got home - that part was definitely a failure. The telltale oil streak of a blown axle seal. My first order of business was to address what I hoped was what caused the seals to leak in the first place - by relocating the rear diff breather. With that out of the way, it was time to address the actual problem - so I…
28 CommentsIf you're just here for the brake line kit, you can pick one up here: Tacoma-to-Tundra Hard Brake Line Upgrade Kit We all have to eat crow sometimes. We've all made mistakes. The most important thing is how you react in those situations. So, "give me a fork!" A couple years ago, as one of my early modifications, I added Tundra brakes to the Tacoma. This isn't anything out of the ordinary - it's one of the more common mods in my opinion. In doing so, I had a decision to make - the same decision that everyone who does this…
19 CommentsI have a confession to make: I procrastinated this job and it may have cost me. So let's back up for a moment. See, this was a mod that I knew I needed to do to the 4Runner as soon as I got it. Toyota has conveniently placed the rear diff breather right on top of the rear diff - pretty much as low as it can go. All well and good except that it's not at all well and good. In that position, not only can the breather can suck water into the diff when submerged in deep water,…
10 CommentsJuly 31 - Aug 1, 2019. We hadn't been back from our adventure on the Idaho Backcountry Discovery Route (IDBDR) long when we decided that we should really get out with the child. After all, we had this nice 4Runner for her to sleep in and the last time we'd gone had been - to our surprise - the "best day of [her] life," according to her. Hoping to best our previous success, we figured that this time, we'd pair the camping with a nice restaurant for dinner and some pick-your-own peaches the following day. Oh, no naive we were to…
1 CommentJuly 29, 2019. In perhaps our most-traveled month to date, July was nearly an entire month in Idaho. In fact, we've had four trips in the last couple of months to this tiny state - after only having visited once before. After our SE Idaho trip to Indian Hot Springs and City of Rocks, our trip to the Highest Roads in Idaho, and running the Idaho Backcountry Discovery route, there are definitely a few things worth mentioning on the rig. So let's get right down to it. Seemingly solved from previous Rig Reviews The Electrical System - now with moar…
7 Comments