January 4, 2020 Another year of wheeling and camping is in the books. I find myself here writing a rig review as one of 2020's first posts, for the last couple of trips that we took in 2019. By and large, the truck performed well on those trips In Search…
1 CommentTag: ADS racing shocks
Today was going to be an easy day working on the truck. I knew what I had to do and it wasn't hard. I'd gathered the parts I needed - twice really, since the first time I tried to do this work, I found that I needed some additional bits…
4 Comments
TL;DR - Replacing the spherical bearings, misalignment spacers, and lower shock bolts is done and things are working correctly as far as I can tell. Not much to say about this one beyond the write-up I did about the install of the new spherical bearings and related components. Tyler at…
Leave a Comment
September 30, 2019. It was another whirlwind of trips through August and September, with three more trips and 21 more nights now in the books: The Whipsaw Trail in BC, Canada, a trip with Pops to the California Sierra, and a nearly two-week adventure through Wyoming and Colorado. Of those, the…
7 Comments
TL;DR - it's been about a year and my spherical bearings are getting squeaky; time to replace them. My understanding is that these are COM10T bearings and that I can just look around on the internet and find the cheapest seller. Ugh, a plan like that always worries me a little…
Leave a Comment
TL;DR - Moving the resis to the top of the frame means there is no more rubbing and I have my turning radius back. It was many months ago that my tires started rubbing on the ADS reservoirs that I'd attached to the frame in the front wheel wells. This…
Leave a Comment
April 29, 2019. The trip to the Alvord Desert and Hart Mountain Antelope National Wildlife Refuge was one that we threw together relatively quickly and without much work on the truck after the previous trip. The only work really was maintenance - an oil change, tire rotation, and re-booting the…
6 Comments
TL;DR - I recommend running front suspension with as little pre-load as possible. Having removed about a third of the pre-load from my ADS setup for this trip, the ride was much better and the suspension felt like it was able to work in situations where it was previously hitting full-droop.…
Leave a Comment
Rig Review is a new type of post that I'm going to try to write up after most trips, where I'll note any things that worked really well, or could have been better. The idea has always been to optimize the Tacoma build and setup over time, so there's nothing…
Leave a Comment
Rig Review is a new type of post that I'm going to try to write up after most trips, where I'll note any things that worked really well, or could have been better. The idea has always been to optimize the Tacoma build and setup over time, so there's nothing…
2 Comments
January 15, 2019. What can I say? It's the end of an era, sort of. Really, it's the end of a transition period for the Tacoma - a time when it was transitioning from daily driver and home renovation hauler to a more dedicated exploration vehicle. It was nearly three…
10 Comments
TL;DR - the ADS setup is working great. We didn't do much dirt travel this time, but what little we did do was no problem at all. More to come in the future. This was the first trip with the relocated rear suspension running 10" travel ADS 2.5" smooth body…
Leave a Comment
December 17, 2018. I'm generally pretty good at building things with my hands, but in relocating the rear shocks on my first gen Toyota Tacoma, I'd royally screwed up. If you haven't read about that, I'd recommend checking out the previous post in this series - Rear Shock Relocation -…
4 Comments
December 3-4, 2018. Rear shock relocation day was finally here! Zane @Speedytech and I were up bright and early so we could be at ADS right around their opening time of 8:00am to pick up the rear shocks they'd been holding for me for the last couple of months. As…
Leave a Comment
December 1-2, 2018. For years now I've run what I'd call "work shocks" in the rear of the truck. First a set of Gabriel Hi-Jackers that I put on to carry heavy loads, then a set of Monroe MaxAir MA820's when I installed the rear lift - these shocks were…
Leave a Comment