TL;DR - I had to weld the CBI spare tire carrier back together again. It is clear to me that CBI did not design this carrier for prolonged real-world use.

escape the ordinary
TL;DR - I had to weld the CBI spare tire carrier back together again. It is clear to me that CBI did not design this carrier for prolonged real-world use.

TL;DR - Thank goodness for good friends. Zane @Speedytech7 noticed this crack in the metal frame that secures the passenger front lower control arm when we were reinforcing my alignment cam tabs. I wasn't even sure I wanted to go to the trouble of upgrading the cam tabs; sometimes, we all get more than a little lucky. Got it welded back up as good as new-ish.

TL;DR - I knew I had cracks in the front passenger corner of the bed, but I had no idea how bad it was. Luckily, I have great friends who could help get it buttoned back up!

TL;DR - The welds on the CBI tire carrier failed on the trail. Once I realized that my welds on it hadn't failed, but those from CBI had, I laughed at the entire situation.


TL;DR - The battery tie down that bolts to the core support has cracked core support as a result of all the rattling around. I've reinforced it, and will monitor it going forward.


TL;DR - I found two cracks in the bed of the truck, likely from the weight of the RTT bouncing around up there. I'll need to fix them and come up with a way to reduce/change the stresses in the future.
