Press "Enter" to skip to content

Tag: victron

Upgrading the House Battery to Lithium | Installation

In the first part of this series, I outlined the components necessary for adding a 12v house electrical system to a Tacoma (or any other vehicle). This time, we'll walk through the specifics on how to do the actual installation of those components in a way that will stand up to the abuse of truck used for adventure. Just a Bit of Background This is my second take at a house electrical battery system installation in the Tacoma. My first system was based around a 12v AGM battery and worked well for more than 6 years. In fact, it worked…

Leave a Comment

Upgrading the House Battery to Lithium | Component Selection

Six years ago, when I initially installed my house battery, it allowed me an entirely new sense of calm when I was in camp at night. No longer did I need to worry about my fridge - or the other small electronics I might turn on or charge - draining my starting battery overnight, thus leaving me stranded. Plus, the whole system of linking the two Northstar AGM 24F using a Blue Sea Systems ML-ACR (automatic charging relay) meant that I could easily - either manually or automatically - link my two batteries for charging or more power, and unlink…

Leave a Comment

Infinite Free Power - Adding Solar to the Tacoma

I just got done camping in one spot for three days. Temps were in the high 80's, the ARB 50qt fridge was set to 35ºF, and the 175W inverter was running much of the time charging various electronic devices. The whole time, I didn't start the truck once. A couple weeks ago, my dual battery system would have been hosed by the end of this trip - probably wouldn't have even lasted the entire time - but when we pulled out of camp this time, the batteries were topped off and had power to spare. This my friends, is the…

9 Comments