Cabin Air Filter Kit - 1st gen Tundra (00-06)

(2 customer reviews)

$29.99

SKU: CABIN-FILTER-KIT-TUNDRA Category: Tags: , , Brand:

Description

1st gen Tundras were great trucks, built to take a beating and keep on ticking. In that light, climate control systems were options, and no Tundras rolled off the line with a cabin air filter to keep the dirt and dust of the daily grind - or worse when pushed off pavement - at bay.

Painstakingly designed (learn more about the design here) to maximize surface area - and thus increase airflow - the AdventureTaco cabin air filter series is comprised of durable, high-quality components, sports an electrostatic filter, and introduces a hassle-free, tool-less installation and filter change.

Keep your cab and your lungs clean.

Compatible Vehicles

  • 1st gen Toyota Tundra (00-06)

Also available for:

Filter details

AdventureTaco cabin air filters utilize an electrostatic filter material that delivers a MERV5 rating to positively affect air quality and your health. It filters particles down to 3 microns in size, including:

  • leaves and twigs
  • dirt and dust particles
  • lint and hair
  • pollen

Air Flow

There's no getting around the fact that adding a filter to a vehicle - that was never designed to accommodate a filter - results in the reduction of airflow. The AdvenureTaco filter design has reduced the impact as much as possible by eliminating more of the frame and filter-supporting grid - thus increasing the size of the filter - compared to previous solutions, but there's still a trade-off for clean cabin air. We've also sourced a high-performance electrostatic filter material that provides increased filtering capabilities with decreased resistance to airflow.

This chart shows the impact of a typical MERV8 filter (blue) and Activated Carbon (black) used by previous implementations, as well as the high-performance AdventureTaco electrostatic air filter (orange) on airflow through each vent at each of the four fan settings.

Also, unlike other products out there, the introduction of AdventureTaco thumbscrews allows such simple, toolless installation, that filter swaps can be easily completed with only your fingers in under three minutes.

Measured with A/C on, recirculate on. AdventureTaco electrostatic filter shows significantly better performance compared to other filters.
Measured with A/C on, recirculate on. AdventureTaco electrostatic filter shows significantly better performance compared to other filters. 

For the data geeks, here are the raw airflow numbers with the AdventureTaco Cabin Air Filter kit, and different types of filters. Note that the airflow relationship between different filter types will be similar for other cabin air filters you might find, but the design of the AdventureTaco kit means it will outperform other kits, even when the same type of filter is installed.

Airflow * No Filter MERV8 ElectroFilter Carbon
Driver Low 8 4.2 7.1 3.7
Med Low 10.1 5.3 8.9 5.1
Med High 15.1 7.3 12.1 7.1
High 23 10 18.7 9.5
-
Center Driver Low 7.3 3.7 5.7 3.5
Med Low 9 4.9 7.3 4.4
Med High 13.1 6.4 9.3 6
High 19.8 8.9 14 8
-
Center Pass Low 6.4 3.5 5.7 3.5
Med Low 7.8 4.2 7.3 4.4
Med High 11.1 5.5 9.1 6
High 15.8 7.3 12.9 8.2
-
Passenger Low 8.4 4.4 7.5 4.2
Med Low 11 5.5 9.1 5.3
Med High 15.5 7.3 12.7 7.3
High 22.5 9.8 18.6 10.4

* Airflow numbers in MPH from each vent.

Installation

I've done my best to make installation a breeze. In fact, every kit comes with three thumbscrews that turn installation into a toolless, 2-minute operation.

You can find the installation instructions here: Installing an AdventureTaco Cabin Air Filter

Replacement Filters

Cabin air filters should be inspected and replaced every 3-6 months. Replacement filters are available at a significant discount, and we're working toward a signup-and-save model so you never have to think about when to replace your filter; we'll remember for you!

Photos

Air filter cartridge, outer frame, and blower motor thumbscrews.
Air filter cartridge, outer frame, and blower motor thumbscrews.
A small grid supports the filter on the fan side, keeping it from interfering with the rotation of the fan.
A small grid supports the filter on the fan side, keeping it from interfering with the rotation of the fan.
A large, removable grid keeps the filter in place on the intake side, with minimal impact on airflow.
A large, removable grid keeps the filter in place on the intake side, with minimal impact on airflow.
A large, removable grid keeps the filter in place on the intake side, with minimal impact on airflow.
Orange dots on outer rings indicate clip locations for installation.
A minimal frame, which clips into the blower housing.

2 reviews for Cabin Air Filter Kit - 1st gen Tundra (00-06)

  1. George Ciavola –

    From: George Ciavola <dinoalta@sover.net>
    Sent: Sunday, November 15, 2026 1:28 PM
    To: AdventureTaco <info@adventuretaco.com>
    Subject: Re: AdventureTaco Order 16181: 1st gen Tundra Cabin Air Filter | Cabin Air Filter Replacement

    Dan,

    I installed the filter on the 2006 Tundra and works like a charm. You have a much better product than any of the others advertised on various sites, well constructed and fits perfectly!

    Thanks for the help and have great Holidays!

    George

  2. Zack –

    Just installed mine and I love it! Dan was quick with the turnaround on my order and everything is top notch. I had one of the fleBay kits installed and the filter element was already coming undone once I got it out.

    The thumbscrews make it so easy to get back on!

    Time will tell how long it takes to dirty up the filter but it's nice and strong on the flow and I don't notice a difference, really. Just a great product all around.

Add a review

Your email address will not be published. Required fields are marked *

The maximum upload file size: 2 MB. You can upload: image. Drop file here