New

Cabin Air Filter Kit (96-04 Tacoma)

$29.99

The cabin air filter you’ve always wanted, designed to filter better, install easier, and maximize air flow.

SKU: CABIN-FILTER-KIT Category: Brand:

Description

Early generations of the Tacoma, 4Runner, Tundra, and Sequoia were great trucks, built to take a beating and keep on ticking. In that light, climate control systems were options, and none of these vehicles included a cabin air filter to keep the dirt and dust of the daily grind - or worse when pushed off pavement - at bay.

Painstakingly designed  to maximize surface area - and thus increase airflow - the AdventureTaco cabin air filter series is comprised of durable, high-quality components, sports a MERV8 filter, and introduces a hassle-free, tool-less installation and filter change.

Keep your cab and your lungs clean.

Compatible Vehicles

  • 1st gen Toyota Tacoma (96-04)

If you're interested in any of these platforms, contact me for a free kit:

  • 3rd gen Toyota 4Runner (96-02)
  • 1st gen Toyota Tundra (00-06)
  • 1st gen Toyota Sequoia (00-06)

Filter details

AdventureTaco cabin air filters utilize an electrostatic filter material that deliveres a MERV5 rating to positively affect air quality and your health. It filters particles down to 3 microns in size, including:

  • leaves and twigs
  • dirt and dust particles
  • lint and hair
  • pollen

Air Flow

There's no getting around the fact that adding a filter to a vehicle - that was never designed to accommodate a filter - results in the reduction of airflow. The AdvenureTaco filter design has reduced the impact as much as possible by eliminating more of the frame and filter-supporting grid - thus increasing the size of the filter - compared to previous solutions, but there's still a trade-off for clean cabin air. We've also sourced a high-performance electrostatic filter material that provides increased filtering capabilities with decreased resistance to airflow.

This chart shows the impact of a typical MERV8 filter (blue) used by previous implementations, as well as the high performance AdventureTaco electrostatic air filter (orange) on airflow through each vent at each of the four fan settings.

Also, unlike other products out there, the introduction of AdventureTaco thumbscrews allows such simple, toolless installation, that filter swaps can be easily completed with only your fingers in under three minutes.

Measured with A/C on, recirculate on.

Replacement Filters

Cabin air filters should be inspected and replaced every 3-6 months. Replacement filters are available at a significant discount, and we're working toward a signup-and-save model so you never have to think about when to replace your filter; we'll remember for you!

Photos

Air filter cartridge, outer frame, and blower motor thumbscrews.
Air filter cartridge, outer frame, and blower motor thumbscrews.
A small grid supports the filter on the fan side, keeping it from interfering with the rotation of the fan.
A small grid supports the filter on the fan side, keeping it from interfering with the rotation of the fan.
A large, removable grid keeps the filter in place on the intake side, with minimal impact on airflow.
A large, removable grid keeps the filter in place on the intake side, with minimal impact on airflow.
A minimal frame, which clips into the blower housing.

Additional information

Weight .5 lbs
Vehicle

Tacoma, 4Runner, Tundra, Sequoia

Reviews

There are no reviews yet

Be the first to review “Cabin Air Filter Kit (96-04 Tacoma)”

Your email address will not be published. Required fields are marked *

The maximum upload file size: 2 MB. You can upload: image. Drop file here