I recently installed SPC Performance upper control arms (25460) on my 2000 Tacoma, and it went great. In addition to the story of the install, I figured a detailed set of instructions for anyone wanting to tackle this themselves would be nice to put together, since it's hard to find that written down in one concise place with a list of everything you need to do the job. So let's get started. Gathering the parts and tools Replacing the upper control arms (UCAs) is a relatively straight forward process, and nearly all the parts you'll need are included from SPC when…
14 CommentsTag: how-to
I recently relocated the rear shock mounts on my 2000 Toyota Tacoma, and it didn't go so well...at least the first time. I didn't get the mounts in quite the right position (you can read the whole story here) and that meant cutting them off and doing everything a second time, the right way. Learn from my mistake. Here, I'll outline the proper steps (in a printable format - check out the story above for photos of the process) to relocating rear shock mounts on a 1st gen Toyota Tacoma - though, the steps are the same for any truck…
Leave a Comment
November 23, 2018. It's amazing how many Hi-Lifts I see driving around the Seattle area. If you didn't know better, you'd think all these folks took their vehicles off-road! Of course, for the majority of them, the Hi-Lift has achieved maximum purpose and use in it's mounting and visible expo factor on the vehicle - but for some, it becomes a critical safety and recovery tool when on an adventure. For those folks, it's important to keep the Hi-Lift in top shape. That means servicing it on a regular basis, ensuring that all parts are in good working order -…
3 Comments
I recently changed the timing belt and water pump on my 2000 Tacoma, and it went great. In addition to the story of shop day, I figured a detailed set of instructions for anyone wanting to tackle this themselves would be nice to put together, since it's hard to find that written down in one concise place (maybe even impossible before now). This is of course based on the Factory Service Manual (FSM) description, but varies slightly (to make things easier) and doesn't require flipping back and forth between many different sections. And, there's a great YouTube video by Timmy…
46 Comments
June 15, 2018. For part 1, see How-to: Planning a Trip/Route (with Google Earth, GPX, KML, and more) So, you've done your research and created a route that you're super-jazzed about. If you're anything like me, it's taken you days. Or weeks. Months of work (on-and-off), even. That's awesome - you're in a small class of folks who do detailed route planning. Now it's time to get out there! You know, like this... Seriously though - the hard part is done, now comes the fun part - seeing the beauty that nature has to offer. Here I'll cover how I take…
7 Comments
June 12, 2018. Route planning for an offroad adventure can be daunting to say the least. Just finding a geographical area to explore is often time consuming, and that doesn't even take into account the time spent figuring out the cool things to visit in that area and how exactly to get to those things (i.e. the actual route). Oh, and then there's navigating that route when you're out in the wild - often without any type of internet connectivity. Because of this, two of the most common questions I see on the interwebs are: How do you plan your…
Leave a Comment
This question is asked often enough that I figured it was finally time to put together an answer that gives lots of information, but that doesn't have to be re-typed again and again. Because that will save everyone a bunch of time, hopefully! So, let's start with the basic question that gets asked: What's the biggest tire I can run on my 1st gen Toyota Tacoma? There are of course variations to this question - some people wonder "with no lift," or "with a 1-3 inch lift," or "without cutting" or "with wheel XYZ" - but in the end, the…
20 Comments
January 6, 2018 For every vehicle I've owned, I've kept a gas/mileage log. Every bit of gas I've put into those vehicles has been recorded - originally into an actual log book, and now directly from the phone into an Excel spreadsheet. There are lots of good reasons to do this - but perhaps the best reason is that gas mileage is a great indicator of overall vehicle health - you should do it for that reason if no other. But I'm a data geek, and recording this mileage info enables my OCD to kick in - to calculate all…
7 Comments
December 30, 2017. I've removed my dash trim (at least, the driver side) more times than I'd care to admit, and figured it was time to write up the procedure - because I remember how daunting it was the first time. Removal starts at the bottom-front of the center console, in front the gear-shift, and works it's way up and counter-clockwise to the instrument panel: Center lower cover Climate control faceplate Center panel finish Lower finish panel Ignition bezel and clock Steering column cover Instrument cluster cover Start by removing the plastic center lower cover (which contains the two 12v…
8 Comments
July 23, 2017. I needed to drill a hole in the roof of my truck. Crazy? Yes. Necessary: Yes. Curious why? I covered that here. So. Removing the headliner. I searched and searched for visual instructions on this and didn’t find any, though I did have the FSM info which turned out to be pretty reasonable. …armed with that, I got started. First I removed the passenger seat to get some room to work. Then, the two clips in the rear of the headliner. Next, I tackled the back panel. Tape on the end of my screwdriver really helped here.…
Leave a Comment
It seems like just about everyone does this mod sooner or later, and I chose a little later. 17 years a little later. The fact that we have to do this mod at all is a bit unfortunate. Designers at Toyota placed a breather for the rear differential right on the diff housing, which means that if you submerse the diff in water when it's hot, the contraction of air in the diff could suck water into the diff, destroying it. Sounds great, right? Yeah, clearly no. The fix is pretty simple: add an extension to the breather to move…
19 Comments