Well, I ran over my 80D and favorite lens with the Tacoma. It wasn't pretty and I wasn't happy, but it happened, and you can read about it in Tragedy in the Tablelands. I'd already been pining after a new, full-frame mirrorless camera, but of course, with a perfectly working setup, I was unlikely to get one. Ultimately, I used this opportunity to pick up a brand-spanking-new Canon R6, and two lenses - an RF 24-240mm f4-6.3 IS USM and a wide angle RF 15-35mm F2.8 L IS USM. It was an expensive day, to say the least. Candy store.…
Leave a CommentCategory: Shop Talk
A parent category that captures non-trip related posts and information. Sub-categories can filter this further.
Well, another year is in the books. It wasn't normal - not by any stretch of the imagination, but we were lucky to get a lot of great trips in despite the precarious situation that the world found ourselves enveloped by for most of the year. As the end of the year rolls around, I recalled enjoying the process I went through for the first time last year - picking through my photos from the year, re-remembering all the great times, so I figured I'd do it again! So let's get started. My Top 24 I see the light. (Exploring…
5 Comments
December 31, 2020. What a CRAZY year! Still, we've been able to get out quite a bit, and as usual, what we take with us has changed slightly. Taken with the Rig Reviews, this series of posts give a good sense of what's working and what's not with the setup. So, without further ado, let's dig into what's on and in the truck at the end of 2020! Additions for 2020 are marked in red. Items we no longer take are struck through. The Truck Itself Obviously we can't adventure without the actual vehicle. To see how it's outfitted, check…
8 Comments
If you've been following along for the last couple of months, you'll know that after 18 years of running my original halogen headlight bulbs, I finally had enough of running blind at night and replaced them with some LEDs - allowing me to see again! Now, after a mere 6 weeks - and really, within two weeks of the switch - I'm changing it up again. I knew as soon as I installed the BEAMTECH H4 LED Headlights that I had some reservations - mostly around the much-bluer-than-halogen light color that was emitted from the housings. It turns out, however,…
16 Comments
The plan with the 4Runner was always to keep it a little bit more tame than the Tacoma. After all, it's our family adventure vehicle - used mostly for home-base-style camping, and less for prolonged driving adventures. But, some systems need to work in both vehicles - and the fridge is a great example. The Backstory Up until this summer, when we ventured over to Washington's Olympic Peninsula, I'd always just nursed the fridge along - running it as we drove to camp, and then turning it off once we reached our destination. There were a few reasons for that…
2 Comments
19 years, 1 month, 28 days. That's how long it's been since my first mod to the truck - when I disabled my daytime running lights (DRLs) - so that I wouldn't have to replace my headlights so often . OK, that, among other reasons. Anyway, I thought the DRL disable mod had been working just fine for the last 18 years - that is, until I went and made my Hella 700FF offroad lights turn on-and-off with my hi-beams. That mostly worked, except that - for some reason I didn't understand at the time - when the Hellas were set to…
Leave a Comment
For years now, I've felt like the headlights on my 1st gen Tacoma left a little something to be desired. More than a little something, really. Some of it is my fault - the bulbs I have installed are over 20 years old, surely not as bright as they once were - but it seems to me that 1998-2000 Tacomas have always had the crappiest of the 1st gen headlights. Initially, I added Hella 500FFs to the front bumper to solve this problem. They were great until they got destroyed when I hit a deer for the first time. I…
Leave a Comment
I've done a lot of work to the suspension on the Tacoma - with good reason since it is what helps to make our trips more comfortable, and what helps to isolate most of the truck from the harsh terrain over which we travel. In doing that work, one of the things I knew that I needed - at least technically - was a good set of limit straps. But - as with many who focus on the bling of a new shock, and less on completely finishing the job - I never installed any. Not on the back, and…
13 Comments
First gen Tacoma's don't see much love from the fabricators these days. It's understandable, really - these trucks are getting older and there aren't as many out there as 2nd and 3rd gen Tacoma's. Plus, those of us that own 1st gens are cheap - that's part of why we're still running these older trucks! Knowing that this was the case even a few years ago, I eagerly awaited a sale to purchase a rear diff skid from Jerry @JLee and the good folks over at Bay Area Metal Fabrication (BAMF). One came along for Black Friday, and despite the…
Leave a Comment
For a couple years now, I've been using a Coleman Camp Grill/Stove. While the stove isn't perfect, I don't consider its drawbacks to be that big a deal, and as far as camp stoves go, I think its one of the better values out there. In fact - both of my (only) complaints about it are related to its fuel system: first, the burners aren't adjustable enough - they tend to be fully on, or off. This is annoying, but not really that big a deal for what I do on the trail, primarily boiling water or reheating food I've previously…
13 Comments
I don't know when I first noticed the terrible windshield sprayers on the Tacoma, but it was probably right around late 1999. I figured there was nothing I could do about it, and so for 20 years, I just suffered through the single-jet-stream-that-gets-spread-by-the-wipers. So, when I saw various folks on TacomaWorld talking about Honda Odyssey replacement nozzles that would spray across the entirety of the windshield - you know, like you would expect - I was intrigued; I never realized that the nozzles were a reasonably standardized item across vehicle manufacturers. Now, not all nozzles will work - the replacement…
13 Comments
Let's see, how did this start last time. Ahh, right... For two years now, my A/C hasn't really worked. At some point - 17 years after it was originally installed - it developed a slow leak. As spring turned to summer in 2018, I noticed that - as Nelly might say - "it's getting hot in herre," even as I cranked up the cold.from It's Too Damn Hot In Here - Fixing the A/C Evap Core Well, I replaced the A/C evap core and things worked well for all of one week. While that sounds bad - and I guess…
2 Comments
With the interior removed for my sound deadening project, it was the perfect time to install a dashcam that I've had sitting around for - I don't know - call it four months or so. I've wanted a dashcam for quite some time - not so much for the safety aspects that some feel it provides - but to capture video, and possibly even stills - of various things we see out the windshield but are unable to grab the DSLR to photograph. So, when I saw a good deal and great reviews for the Viofo A119 v3, I picked…
1 Comment
I just got done camping in one spot for three days. Temps were in the high 80's, the ARB 50qt fridge was set to 35ºF, and the 175W inverter was running much of the time charging various electronic devices. The whole time, I didn't start the truck once. A couple weeks ago, my dual battery system would have been hosed by the end of this trip - probably wouldn't have even lasted the entire time - but when we pulled out of camp this time, the batteries were topped off and had power to spare. This my friends, is the…
9 Comments
For two years now, my A/C hasn't really worked. At some point - 17 years after it was originally installed - it developed a slow leak. As spring turned to summer in 2018, I noticed that - as Nelly might say - "it's getting hot in herre," even as I cranked up the cold. For a while, I ignored it. There was no way I was ready to tackle the A/C system from a skills perspective - or so I thought at the time - and I knew that taking it to a shop was going to be rather expensive.…
Leave a Comment
Being a heavy user of my Cascadia Tents (CVT) Mt. Shasta roof top tent (RTT), I get asked - somewhat infrequently - what I think about it after all those nights on the trail. And, I often find myself evaluating it against other RTT offerings that I see on other rigs. So, rather than keep all that bottled up in my tiny little skull, I figured I'd share my thoughts with everyone - after 3 years and some 250 nights on the trail and in the tent. Brands (and durability/longevity) From what I can tell, they are all pretty much…
4 Comments
It seems like just a few weeks ago that I replaced the spherical bearings on my ADS coilovers for the first time, though it turns out, it was actually a few (4) months ago. Prior to that, I'd put some 27K miles on the new ADS suspension (see installation) - miles that really proved to me that it was a worthwhile investment. Unfortunately, on our last trip down to the Eastern Mojave, the coilovers had been squeaking again. Well, really they'd been squeaking before we even left - but with only 7K miles on the odometer since the previous change,…
Leave a Comment
I get asked - not infrequently - whether I carry gun(s) with me on my numerous outdoor adventures. So without further ado, here is what might be my most controversial post ever. You've been warned. First a few ground rules: I want to try to stay non-political. I recognize that this is a highly politicized topic in society today, but I'm not approaching it from that perspective. These are my current opinions. I reserve the right to change them at any time and I may or may not update the post. I'm totally fine with anyone else having the same…
16 Comments
On our last trip to the Eastern Mojave, one of the things I noted early in the trip - actually, before the trip even started really - was that the battery in the cab seemed low. I chalked it up to an error on my side and figured that the long 20-hour drive from home to our first hike would be enough to get it back up and kicking. It sort of did, but the battery seemed weak the entire trip, dropping below 12V reasonably quickly - much more quickly than it has in the past. Initially I figured that…
3 Comments
I've been putting off rear brake shoe replacement on the 4Runner for quite a while. In fact, it's been almost six months to the day since I replaced the rear axle seals, and I've needed to do the job since then - the gear oil that leaked out through the brake drums, having contaminated the rear brake shoes. But, I didn't want to replace the shoes at the same time I replaced the axle seals because it was my first time doing the seal job and I wanted to make sure the new seals were working correctly before I risked…
Leave a Comment