I've very much enjoyed my Alcan leaf springs. The first set I had was near as perfect as I could ask, and working with Lew - the new owner in 2020 - on the second set was a pleasure, even if the end result wasn't as perfect as I could…
17 CommentsMods and Maintenance: Suspension | Rear
If I've learned one thing over the last several years, it's that bumpy roads are a lot of fun. The problem - as anyone who knows them can attest - is that in time, all good things get destroyed by bumpy roads. It is a conundrum. The key of course,…
10 CommentsTL;DR - I had to cut my trip short when another leaf - this time the main leaf - broke on the first day of a 4 day adventure. I've now replaced the leaf springs, solving the problem. For the second time in six months, a leaf spring broke. In…
Leave a CommentTL;DR - The top, military wrap half-leaf on the driver side broke in two places. I'm not sure what I'm going to do as far as replacement goes, but I have two options. A couple days into the Last Minute Rush trip, I discovered that a new clanking sound from…
Leave a CommentOctober 16, 2021. It's been nearly three years since I installed my ADS suspension on all four corners of the Tacoma. I did the rears first - twice, actually - relocating them for more travel. The fronts were installed not long after, and of course I've been battling the spherical…
2 CommentsApril 2, 2019. I like to think that I live and learn. I'm also a creature of habit, and I wonder if I'm starting down the same road I've been down before. See, with the Tacoma, I thought long and hard about the first set of aftermarket suspension that I put…
9 CommentsTL;DR - the ADS setup is working great. We didn't do much dirt travel this time, but what little we did do was no problem at all. More to come in the future. This was the first trip with the relocated rear suspension running 10" travel ADS 2.5" smooth body…
Leave a CommentDecember 17, 2018. I'm generally pretty good at building things with my hands, but in relocating the rear shocks on my first gen Toyota Tacoma, I'd royally screwed up. If you haven't read about that, I'd recommend checking out the previous post in this series - Rear Shock Relocation -…
4 CommentsDecember 3-4, 2018. Rear shock relocation day was finally here! Zane @Speedytech and I were up bright and early so we could be at ADS right around their opening time of 8:00am to pick up the rear shocks they'd been holding for me for the last couple of months. As…
Leave a CommentDecember 1-2, 2018. For years now I've run what I'd call "work shocks" in the rear of the truck. First a set of Gabriel Hi-Jackers that I put on to carry heavy loads, then a set of Monroe MaxAir MA820's when I installed the rear lift - these shocks were…
Leave a CommentJanuary 3, 2018 When I got my Alcan leaf pack, I knew it was top quality. I really liked how the guys at Alcan asked what I wanted from the pack, as far as "every day" weight in the back, as well as "loaded" weight for adventures. So far, I've…
2 CommentsJuly 15, 2017. The truck has always had a bit of rake, with the rear being ~2-3” higher than the front. And I like it that way - it looks good. Until the constant weight of the bed rack and CVT, the combination of stock leafs, Deaver AALs, and air…
4 CommentsJune 23, 2008. There was a time when I was working with Dad on some job site when we went and filled up the back of his Jeep (1989 Cherokee Laredo) with bags of concrete, and he pulled out a bike pump to inflate his rear shocks. I was hooked.…
Leave a Comment