TL;DR - My Cooper ST/Maxx tires finally gave me a bit of trouble. Still, I'll probably buy a 5th set when these wear out because they've performed better than any other tire I've seen others run on the trail.
Leave a CommentShop and Gear: Recovery Gear
A few years ago, I wrote a post about how I got started adventuring out into the middle of nowhere all by myself. I went into a bunch of details about my experiences growing up, and how those experiences shaped me into the traveler I've become. Still, one of the things I mentioned not being fully prepared for was a bodily injury or "now-we're stranded" problem with the Tacoma. It was about six months ago that I acquired a Garmin inReach Mini. I wrote about it only briefly as part of the Hiking Saline Valley trip that spurred the purchase…
24 Comments
It's not natural. It's uncomfortable. It's hard. And, I know it's the right thing to do - I want to find a way to cut some weight off of the Tacoma. When I purchased the truck, Toyota listed the curb weight of a 4WD SR5 V6 Xtracab at something right around 3,500 lbs, and the gross weight (GVWR) at something near 5100 lbs. Or at least, that's what I can find on the internet in 2019, since I wasn't at all interested or concerned with those numbers at the time. Unfortunately for me - and the truck - when I…
10 Comments
TL;DR - It's more valuable than I'd given it credit for. Mine is a little "sticky" going up and down - likely a result of how I store it.
Leave a Comment
TL;DR - The question for me when it comes to recovery tracks is, are they worth it? For me, I think the answer is still "not yet," but I'm more on the fence than I've been in the past.
Leave a Comment
TL;DR - I think I often overlook the little stuff that I take on trips that just does its job, or that may not be used every trip, but is really handy when the time comes. A few of those things saved the day this time and I think it's worth highlighting their value.
Leave a Comment
October 9, 2016. When the winch was installed, it was obviously wired right up to the battery - this made a lot of sense, since it was easy, allowed us to get it spooled up, and is of course the way Warn recommends installing it. But I wanted something better. Or at least more flexible. I wanted to have a way to disconnect the winch from the battery when it wasn't in use (just so I don't have a bunch of #2 AWG wire hot to the winch all the time, and I wanted a way to quickly hook up…
2 Comments