September 21, 2018. Well, we're now a two-Toyota family. For the last several months, @mrs.turbodb and I have been talking about getting a 4Runner so that our adventures with @mini.turbodb can be more comfortable for her - the extended cab of the Tacoma becoming a tight space for a growing kiddo. A 4Runner - especially an older 3rd gen one - seemed like a good choice. Proven Toyota reliability, a similar platform (and the same engine) to the Tacoma, and four doors! So when this beauty came along, we were quick to go check it out. It's a 1997 with…
Leave a CommentMods and Maintenance: Body (and Bed)
May 12, 2018. We all know how it goes - the list of things to do to the truck is so long that we have to prioritize. And often, that prioritization favors form over function. And from time to time, I've been as guilty of that as the next guy, for sure. But not this time. This time, I knew that I needed the function with the form, lest I do irreparable damage to the Tacoma. So, when I installed the dual swingout CBI rear bumper in January, I purchased a set of frame reinforcement plates at the same time from @cbi offroad…
8 Comments
February 26, 2018. I always dread cleaning the bed of the truck. I don't mean sweeping or washing out the bed liner - I mean, I don't like that either - but the part I really dread is removing the bed liner and cleaning underneath it. There are a couple reasons for this: first, it's hard to get the liner out; it's really wedged in there (which is good the rest of the time). Second, I always worry (rightly, I think) that when I take out the bed liner, I'm going to see how it's destroyed my bed - rubbing off…
3 Comments
December 4, 2017. Having recently installed bigger-than-stock tires, it was of course clear that I needed to do something to get them to fit up front, even before I get my new wheels installed... I mean, they didn't rub when driving on perfectly level ground which was nice, but pair a turn with some articulation of the front suspension and I had a bit of rubbing (just discernible on the bottom of the plastic) in the rear of the wheel well (like everyone). The "normal" solution is to cut out the rear of the fender liner and bash down the…
7 Comments
August 20, 2017. As soon as I installed the bed rack, I knew that there were going to be trade-offs - on the one hand, it made for a much nicer sleeping experience with the CVT; on the other, it was a lot harder to get stuff that was in the bed of the truck. Like the cooler, and kitchen stuff. Don’t get me wrong, it’s a trade-off that’s totally worth it. But what if it didn’t have to be a trade-off? What if I could have my cake and eat it too? That’s what I thought when I heard…
Leave a Comment
February 14, 2017. You may recall that no too long ago I decided to purchase a CVT, and then of course realized that the truck would need a bed rack to attach said CVT. That led to my Millermatic 211 acquisition, and the realization that this bed rack was the beginning of yet another expensive hobby (metalwork). Excited to get going, I started looking for bed rack designs. I wanted something that would support the CVT - both on the road as well as deployed would position the top of the CVT "in-line" with the top of the cab -…
Leave a Comment
November/December 2006 It's snowing! The truck loves snow. Snow means pulling people out of ditches, driving on roads that are impassable by cars, and having an all-around good time. One night I headed over to pick up Gina from school (the buses had stopped running) and the unthinkable happened. Getting off the Montlake exit in Seattle, the car in front of me slammed on it's brakes. I did the same, and started to fishtail. Already going slowly, it didn't take long (time or distance) to come to a stop, but just as the truck came to a rest, the font…
Leave a Comment