January 16, 2018. The Kenwood D710GA has been working well since it was installed. Transmission and reception seem good, the APRS has worked as expected, the display is nice (but not quite as nice as the Icom 5100A), and it's great having it securely mounted under the passenger seat. But the built-in speaker - that leaves something to be desired. With the Icom, I had no trouble hearing what contacts were saying, but even with the volume turned all the way up on the Kenwood, it's just slightly too quiet for me to parse what's being said. Luckily (and of…
3 CommentsTag: fabrication
Fixing the IFS Skid Mounts January 14, 2018. "That's strange." I thought as the guys at JT's Parts and Accessories took my IFS Front Skid off to replace the gears in my front diff. "I don't remember the guys from @RelentlessFab putting any clips behind the middle bolts. I wonder how those help hold the skid on?" A couple hours later, the three of us realized that in fact, there were no clips installed by Relentless - rather, the OEM mounts had broken off! I probably shouldn't have been surprised - the skid is beefy at 3/16" thick, surely stronger…
Leave a Comment
November 1, 2017. I've always hated the A-pillars in my truck. Actually, it's the trim I hate. And I've hated it since I first tried (and failed) to remove it several years ago to run the wire for a microphone from my head unit up to the rearview mirror. See, to remove the A-pillar trip, you also need to remove the grab handle. And for some reason, in 1997-2000 Tacoma's, the grab handle is attached with two M6 screws (no hex head) with a JIS head. That JIS head looks a lot like a Philips head, but it isn't, and…
1 Comment
Nice hot showers. Love those. Of course, when you're out exploring the wilderness, showers can be few and far between. Often times that is fine - there are opportunities for hot springs, lakes, and creeks - any of which can make a great place for lathering up and taking care of some of the sweaty grime that can build up. But sometimes it'd still be nice to have a warm shower. On our week-long trip running the Oregon Backcountry Discovery Route, it turned out that the first 4 days of the trip presented no washing opportunities. And with temps hovering…
2 Comments
August 20, 2017. As soon as I installed the bed rack, I knew that there were going to be trade-offs - on the one hand, it made for a much nicer sleeping experience with the CVT; on the other, it was a lot harder to get stuff that was in the bed of the truck. Like the cooler, and kitchen stuff. Don’t get me wrong, it’s a trade-off that’s totally worth it. But what if it didn’t have to be a trade-off? What if I could have my cake and eat it too? That’s what I thought when I heard…
Leave a Comment
June 18, 2017. As our excursions have been getting longer and more remote, I’ve started paying more attention to things like the amount of extra fuel and water we carry. It’s still nothing too extreme - 6 gallons of fuel (50-100 miles) and 6 gallons of water (several days). And for convenience of packing, I’ve switched over to Rotopax from the cheapo red plastic gas cans and 1-gallon milk jugs. Of course, even finding deals on Craigslist means that I’ve spent a small fortune on the containers. But, they look great and are relatively compact when a trip gets started……
Leave a Comment
April 2017. Wires everywhere. That’s how it’s starting to feel with the various accessories that I’ve added to the truck. Sure, I tuck them away here, and zip-tie them away there to try to clean things up, but in the end I still have several pair of wires running from various fuses and relays in the engine compartment to accessories and switches on the truck. As someone who likes organization, it’s always bothered me. Luckily, there are solutions out there for those of us who like order. There are pre-made fuse boxes from folks like Blue Sea Systems, and there…
Leave a Comment
February 14, 2017. You may recall that no too long ago I decided to purchase a CVT, and then of course realized that the truck would need a bed rack to attach said CVT. That led to my Millermatic 211 acquisition, and the realization that this bed rack was the beginning of yet another expensive hobby (metalwork). Excited to get going, I started looking for bed rack designs. I wanted something that would support the CVT - both on the road as well as deployed would position the top of the CVT "in-line" with the top of the cab -…
Leave a Comment
October 18, 2016. I am a woodworker. For the last twenty years, metal (stock and shavings), oils, and dirt have been systematically removed from my shops - they can bring no good to wood projects. Metal can dull blades and stain wood as it rusts, oils can soak into the wood and make finishing near impossible, and dirt - well, no one ever said "Can you make that fine furniture a little dirtier?" (I take that back - some do - and I think it's crazy to "pre-distress" a piece.) But I've always been curious about metalwork. And I've always…
Leave a Comment