The persuader.
TL;DR - While I think that Relentless armor is some of the best out there, the mounting of the skid plates could have been better and is causing me a bit of trouble over the years (because I lightly beat the truck).
Leave a CommentTag: relentless fabrication
It's always fun to drill a square hole.
TL;DR - I finally got off my butt and fixed the skid plate by cutting a square hole so I can use a carriage bolt to secure it to the transmission crossmember, rather than the small welded ears that kept breaking off.
Leave a Comment
TL;DR - I replaced the bolts with grade 8 versions, hopefully solving the problem for good.
Leave a Comment
TL;DR - The middle two mounts on the mid skid broke off again. I need to come up with a new way to secure the mid-skid at the crossmember.
Leave a Comment
TL;DR - The mid-skid is now securely fastened to the frame again, nearly a year later!
Leave a Comment
TL;DR - The skid plates are holding up, but the mounting strategy could have been better. For the 3rd time, I'm modifying it.
Leave a Comment
Every now and then, there's some un-sexy, mundane, stuff that we do to our trucks just to keep them in good working order. These don't usually get a lot of publicity since they do little to increase the cool factor, and don't have the high-profile pizzazz worthy of the 'gram. So today, I did a bit of maintenance. Since getting the @RelentlessFab sliders installed a couple of years ago, they've done everything I've asked of them and have required essentially no maintenance. But, as time has passed, I've noticed that the area where they were welded to the frame has…
2 Comments
With summer fast approaching, I decided that it'd be a good time to take a look at the skids - so I could clean up any rust, and repaint them for the season. I'm not sure how necessary that is - I mean, at 3/16" thick, these @relentlessfab plates would take quite a while for rust to destroy - but it's an easy process, so why not. Removal was straight forward though a bit unwieldy, and I was happy to find that my re-welded anchors were holding up well. I was also happy to see that my skids had saved…
Leave a Comment
Fixing the IFS Skid Mounts January 14, 2018. "That's strange." I thought as the guys at JT's Parts and Accessories took my IFS Front Skid off to replace the gears in my front diff. "I don't remember the guys from @RelentlessFab putting any clips behind the middle bolts. I wonder how those help hold the skid on?" A couple hours later, the three of us realized that in fact, there were no clips installed by Relentless - rather, the OEM mounts had broken off! I probably shouldn't have been surprised - the skid is beefy at 3/16" thick, surely stronger…
Leave a Comment
October 2, 2016. The day before we left for Crater Lake, the mid-skid had arrived - but I didn't have time to paint and install it before we took off. Not a big deal, since the IFS skid covers just as much as both stock plates. But of course, I wanted to get the mid-skid on just as soon as possible, so upon our return I figured some after-work cleanup and painting was in order. As expected, the unpainted skid had a bit of surface rust and dirt on it, so my first task after unboxing was to give both…
Leave a Comment
September 2016. As an astute reader will recall, when the Relentless armor was installed, the skid plates were placed in the back of the truck. Actually, just one was placed in the back, since the second wasn't going to fit my truck - a California model with an extra catalytic converter. Upon getting the first skid home, I painted it immediately with a couple coats of Rustoleum professional enamel primer, and a few coats of flat black. Looked reasonably good. "I like the R," said @mini.turbodb. Then, I waited. I mean, I should put both skids on at once, I…
Leave a Comment
August 23, 2016. The trip was a long awaited one. But first, some background. The lead up Six months ago (Feb 2016), I'd decided it was finally time to get a winch on my Tacoma - to allow me to get out of jams (if I get in one); to increase safety on certain trails when we're out solo, and to open up new trails where a blow-down may need to be moved out of the way (for instance). Initially I was going to go with a hidden front hitch, and a winch that I could move to the front…
2 Comments