Anyone who owns a 4WD Toyota and has dealt with the drain and fill plugs on the IFS front diff knows that they generally suck. They use either a 10mm or 12mm hex key, and that can be a problem for many reasons: The recess that the key fits into can easily get filled up with crud. If the recess isn't cleaned and the hex key doesn't fully seat, it's easy to round over. Hex key's aren't generally all that long, so it's hard to get the leverage needed to loosen the plugs. The plugs can get extremely tight, making…
20 CommentsCategory: Tacoma Build
General catch-all category for content relating to 2000 Tacoma modifications.
It's no secret that the the quickest way to massive numbers of broverlanding points is by adding more lights. Light bars, rock lights, ditch lights, reverse lights, amber lights, raptor lights, camp lights, interior LED lights - you name it, and you can drop a few hundreds or thousands of dollars to make your truck look lit - literally - in daytime photos. That's not what this mod is about. I mean, it's about auxiliary lights, but it's about how to make them more functional. Specifically, how to make it so that extra light can be switched by both your…
1 CommentIf you're just here for the brake line kit, you can pick one up here: Tacoma-to-Tundra Hard Brake Line Upgrade Kit We all have to eat crow sometimes. We've all made mistakes. The most important thing is how you react in those situations. So, "give me a fork!" A couple years ago, as one of my early modifications, I added Tundra brakes to the Tacoma. This isn't anything out of the ordinary - it's one of the more common mods in my opinion. In doing so, I had a decision to make - the same decision that everyone who does this…
19 CommentsWell, this post is a long time in the making. In fact, I assumed this was a project I'd get taken care of in the dead of winter, since much of it would be done in the wood shop, and none of it required the truck to be outside in the rain and cold. But like many well-laid plans, mine got comfortable and took a six-month nap. So let's start at the beginning... My Battery History To date, I've only had to replace the battery in the truck once. I did that back in 2011 after owning the truck for…
28 CommentsJune 12, 2019. (and really, the preceding two weeks) It's no secret that over the last few years, I've been through quite a few sets of wheels. I started with my stock 15" aluminum alloys, which "had to go" as part of the most expensive brake upgrade ever and resulted in the Tacoma wearing a set of steel wheels for a couple of months. I knew these were temporary - and the long-term solution was yet to come. I knew when I bought them that the SCS Steath6s were the last wheel I'd ever purchase for the Tacoma. I mean, what more could…
35 CommentsMay 10, 2019. When I originally built my bed rack back in 2016, I was sure that the rack was going to be something that was only installed when we were out on an adventure. The rest of the time, I'd remove it using the pulley system in the garage so that the Tacoma could be it's natural self. Oh how naive I was. Turns out, there's no reason to stop adventuring in the winter, and quite frankly, the rear suspension on the truck is much more comfortable with the couple hundred extra pounds from the tent. Plus, I don't really…
4 CommentsI love the look of the SCS Stealth6 wheels that I've been running for the last 14 months. The dark bronze and six spokes are fantastic. Even the lug nuts are significantly better than OEM. And, as much as I hate to admit it, I really do like stance added to the truck by the 3.5" backspacing - having the wheels and tires pushed out a bit wider makes the truck look ready for anything. But, I can't stand the mud. That same backspacing that gives the truck a cool stance also pushes the tread of my 255/85R16 Cooper ST…
2 CommentsJanuary 15, 2019. What can I say? It's the end of an era, sort of. Really, it's the end of a transition period for the Tacoma - a time when it was transitioning from daily driver and home renovation hauler to a more dedicated exploration vehicle. It was nearly three years ago that this transition started, one of my first modifications being a new Toytec BOSS lift in order to support the Relentless armor I was soon to install. Over the last three years, that @Toytec Lifts setup has done everything I could have asked of it. No, that's not right…
10 CommentsDecember 17, 2018. I'm generally pretty good at building things with my hands, but in relocating the rear shocks on my first gen Toyota Tacoma, I'd royally screwed up. If you haven't read about that, I'd recommend checking out the previous post in this series - Rear Shock Relocation - Fabrication and Failure, where after I'd permanently welded a bunch of stuff to my truck, I'd discovered that I couldn't go over bumps taller than about 2-inches. Not good for adventuring out on dirt roads. But, failure is a great learning tool, and I'd spent some time figuring out why…
4 CommentsDecember 3-4, 2018. Rear shock relocation day was finally here! Zane @Speedytech and I were up bright and early so we could be at ADS right around their opening time of 8:00am to pick up the rear shocks they'd been holding for me for the last couple of months. As generally seems to be the case when it comes to truck parts stores, we were both like kids in a candy store as we ogled around the ADS facility. Definitely quite the setup they've got going on there! Tyler, who'd been helping me with my shocks, walked us around for…
Leave a CommentDecember 1-2, 2018. For years now I've run what I'd call "work shocks" in the rear of the truck. First a set of Gabriel Hi-Jackers that I put on to carry heavy loads, then a set of Monroe MaxAir MA820's when I installed the rear lift - these shocks were great for carrying heavy loads since I could add air pressure to push the rear of the truck higher. But as truck use has changed to more exploration (perhaps even the overused "overlanding), it's become clear that the ride provided by these shocks is not ideal. The rear end takes…
Leave a CommentIt's been about six months since I drove over to eastern Idaho to pickup and install the CBI Outback 1.0 rear bumper with dual swing-outs on my way down to The Maze in Utah. In that time, the bumper has performed well - I'm generally really happy with it, save a couple niggly things that I should probably write up as a "what do I think six months later," sort of post. But, one thing that I've been missing - and knew I was missing when I purchased the bumper - was a fold-down table on the swing-out. This was…
3 CommentsMay 12, 2018. We all know how it goes - the list of things to do to the truck is so long that we have to prioritize. And often, that prioritization favors form over function. And from time to time, I've been as guilty of that as the next guy, for sure. But not this time. This time, I knew that I needed the function with the form, lest I do irreparable damage to the Tacoma. So, when I installed the dual swingout CBI rear bumper in January, I purchased a set of frame reinforcement plates at the same time from @cbi offroad…
8 CommentsApril 2, 2018. A while back, I somehow stumbled on @jberry813's post where he installed a garage door opener in his headliner (Homelink in a 1st gen) near the map lights. Having the same issues - a garage door remote that floats around in the center console; @mrs.turbodb's car that has it built into the sun visors) - I decided that this was something I needed to do right away. That was a little over a year ago. Rightly, other mods took priority - and I'm glad they did. See, I never should have done this mod, but most other…
4 CommentsMarch 14-15, 2018. There is perhaps nothing that changes the look of a truck more than adding a swing-out rear bumper. Sure, you can argue for bigger tires or lift or a front bumper, but in my mind, none of those things compare to the entirely new footprint that a rear-swing-out brings, what with the spare tire and jerry can mounts that add two additional feet to the length of your truck. But as usual, I'm jumping into the middle of the story. Let's back up a bit. Since starting to really build out the truck for adventuring, I've known that…
6 CommentsFebruary 21, 2018. How many miles do you have on your truck? If you're anything like me, you'll answer this by looking at your odometer, reading a number, and concluding that you have that many miles - 83,078 miles in my case. Like me, you're wrong. Your odometer is lying to you. And so is your speedometer. I covered why that is here - go read it. I'll wait. Speedometers, Odometers, and Gas Mileage – All Lies! OK, welcome back. Or not if you're like me and just skipped over that last link. Let me try to recap: The reading…
30 CommentsJanuary 16, 2018. The Kenwood D710GA has been working well since it was installed. Transmission and reception seem good, the APRS has worked as expected, the display is nice (but not quite as nice as the Icom 5100A), and it's great having it securely mounted under the passenger seat. But the built-in speaker - that leaves something to be desired. With the Icom, I had no trouble hearing what contacts were saying, but even with the volume turned all the way up on the Kenwood, it's just slightly too quiet for me to parse what's being said. Luckily (and of…
3 Comments