March 14-15, 2018. There is perhaps nothing that changes the look of a truck more than adding a swing-out rear bumper. Sure, you can argue for bigger tires or lift or a front bumper, but in my mind, none of those things compare to the entirely new footprint that a rear-swing-out brings, what with the spare tire and jerry can mounts that add two additional feet to the length of your truck. But as usual, I'm jumping into the middle of the story. Let's back up a bit. Since starting to really build out the truck for adventuring, I've known that…
6 CommentsCategory: Tacoma Build
General catch-all category for content relating to 2000 Tacoma modifications.
February 21, 2018. How many miles do you have on your truck? If you're anything like me, you'll answer this by looking at your odometer, reading a number, and concluding that you have that many miles - 83,078 miles in my case. Like me, you're wrong. Your odometer is lying to you. And so is your speedometer. I covered why that is here - go read it. I'll wait. Speedometers, Odometers, and Gas Mileage – All Lies! OK, welcome back. Or not if you're like me and just skipped over that last link. Let me try to recap: The reading…
30 Comments
January 16, 2018. The Kenwood D710GA has been working well since it was installed. Transmission and reception seem good, the APRS has worked as expected, the display is nice (but not quite as nice as the Icom 5100A), and it's great having it securely mounted under the passenger seat. But the built-in speaker - that leaves something to be desired. With the Icom, I had no trouble hearing what contacts were saying, but even with the volume turned all the way up on the Kenwood, it's just slightly too quiet for me to parse what's being said. Luckily (and of…
3 Comments
Fixing the IFS Skid Mounts January 14, 2018. "That's strange." I thought as the guys at JT's Parts and Accessories took my IFS Front Skid off to replace the gears in my front diff. "I don't remember the guys from @RelentlessFab putting any clips behind the middle bolts. I wonder how those help hold the skid on?" A couple hours later, the three of us realized that in fact, there were no clips installed by Relentless - rather, the OEM mounts had broken off! I probably shouldn't have been surprised - the skid is beefy at 3/16" thick, surely stronger…
Leave a Comment
January 12, 2018. The day has arrived, finally. For three months, I've had a set of SCS Stealth6 wheels stacked, in the boxes they arrived in, in the living room. @mrs.turbodb has not been happy. In that time, I've been trying to decide what tires I want to run on those wheels. I knew I wanted 33's, and I knew that I wanted as little rubbing as possible, but that left me with three options: BFG KM2's or KM3's @ 255/85R16 - these have the right profile (tall and skinny) for less rubbing, and a nice aggressive tread pattern, but…
5 Comments
January 3, 2018 When I got my Alcan leaf pack, I knew it was top quality. I really liked how the guys at Alcan asked what I wanted from the pack, as far as "every day" weight in the back, as well as "loaded" weight for adventures. So far, I've been really happy with how it has held the weight in the bed, provided a better ride than my OEM leafs (which were perpetually riding on the overloads and bump stops), and have given the truck back it's aggressive stance, even when loaded. Once I got bigger tires however, I…
2 Comments
December 6, 2017. Over the last 17 years, the truck has been amazing. Truly a joy every time I get in it, work on it, or even just get all googly-eyed looking at it. But, as we've started bigger and longer adventures, and turned it into an adventure truck as much as an around-town-mobile, the truck has slowly gotten to a point where it was time to do something about the drive train. Big Tires = Big Problem …and by slowly, I mean it was about like this: And that cliff, right there at the edge, was the installation of…
19 Comments
December 4, 2017. Having recently installed bigger-than-stock tires, it was of course clear that I needed to do something to get them to fit up front, even before I get my new wheels installed... I mean, they didn't rub when driving on perfectly level ground which was nice, but pair a turn with some articulation of the front suspension and I had a bit of rubbing (just discernible on the bottom of the plastic) in the rear of the wheel well (like everyone). The "normal" solution is to cut out the rear of the fender liner and bash down the…
7 Comments
Having just installed a new ham radio setup to get APRS, I was keen to play with Kenwood TM-D710GA and Mobilinkd to track my location. So, on a few local trips, I turned everything on and waited. And waited and waited. Over the course of 30 minutes, I never got a single APRS beacon from another station. I knew something was wrong. And then I realized that the difference between my initial setup and my current situation was that the truck was on. Turning the truck off resulted in almost immediate APRS packets coming through. Crap, something is causing interference…
2 Comments
November 5, 2017 It wasn't all that long ago that I got my Ham radio license and installed an Icom-5100 in the truck. A great radio, it's gone now - because a great radio isn't all I need; I need a great radio that can also do APRS. What's APRS and why's it so important? Great question, let's start there! APRS is the "Automatic Packet Reporting System," a machine-parsable protocol used on a known frequency (144.390 in the US) to send all kinds of information from one ham radio to another. But the reason I care about it is that…
20 Comments
November 1, 2017. I've always hated the A-pillars in my truck. Actually, it's the trim I hate. And I've hated it since I first tried (and failed) to remove it several years ago to run the wire for a microphone from my head unit up to the rearview mirror. See, to remove the A-pillar trip, you also need to remove the grab handle. And for some reason, in 1997-2000 Tacoma's, the grab handle is attached with two M6 screws (no hex head) with a JIS head. That JIS head looks a lot like a Philips head, but it isn't, and…
1 Comment
October 28, 2017 New brakes nearly installed, I waited anxiously to see how the replacement brake line that Steve @Wheeler's Off Road sent was mailed - was it fast, or would it be slow? It was great - he sent it 1-day and I had it Saturday morning. Not only that, but he sent an entire brake line kit, so now I've got an extra line and set of crush washers to throw in the trail kit, in case something goes wrong on my or a buddy's truck! Thanks Steve! Installing the line was pretty straight forward, especially as I'd…
Leave a Comment
If you're here looking for how to install Tundra 13WL or 13WE brakes on a 1st gen Tacoma, you can read how I did it on this particular day, but the more useful page for you will probably be this guide: Step by Step Tundra Brake Upgrade on a Tacoma (or 4Runner) The guide shows step-by-step (with pics) how to do the upgrade, and has links to all the parts needed (at varying price points). When you find yourself on a trip with other Tacoma owners, there's a tendency for everyone to come away from the trip wanting something. And…
6 Comments
September 10, 2017. When I got the ham radio, my hope was that I'd just skip the whole CB thing. I mean, when you've got the real thing… 🙂 But, as it turns out (and let's be honest, I knew this when I installed the ham radio), a lot of folks don't have a HAM license, so CB's are the common denominator on trips. About to set-off on a 14-day De-Tour of Montana and Wyoming, it was time to get the CB installed. For First Gen Tacoma's, there's really only one option for a CB radio IMO - the Uniden…
4 Comments
Nice hot showers. Love those. Of course, when you're out exploring the wilderness, showers can be few and far between. Often times that is fine - there are opportunities for hot springs, lakes, and creeks - any of which can make a great place for lathering up and taking care of some of the sweaty grime that can build up. But sometimes it'd still be nice to have a warm shower. On our week-long trip running the Oregon Backcountry Discovery Route, it turned out that the first 4 days of the trip presented no washing opportunities. And with temps hovering…
2 Comments
August 20, 2017. As soon as I installed the bed rack, I knew that there were going to be trade-offs - on the one hand, it made for a much nicer sleeping experience with the CVT; on the other, it was a lot harder to get stuff that was in the bed of the truck. Like the cooler, and kitchen stuff. Don’t get me wrong, it’s a trade-off that’s totally worth it. But what if it didn’t have to be a trade-off? What if I could have my cake and eat it too? That’s what I thought when I heard…
Leave a Comment
July 23, 2017. Ham radio is for old guys. I must be getting old. As the truck has gotten more capable, and as we’ve started doing longer and more remote trips, I’ve started carrying more tools, extra parts, etc. in order to make (minor) road repairs - hopefully enough to limp back to civilization. But in the back of my mind there is always a little voice that’s been saying, “What happens if you’re many miles out?” I knew I needed some sort of ability to communicate. I considered getting an inReach device a SPOT tracker, or some other ePRB/PLB,…
2 Comments
July 22, 2017. It was July 8, 2017. I know because I will always remember the day @mrs.turbodb said, "You should just get a fridge for the truck." We'd just returned from our week-long trip to Canada with the little kiddo, where we'd pre-prepared and frozen many of our meals, using our crappy 48qt cooler to keep everything chilly. Of course, even sandwiched in the middle of our gear and under the CVT, we had to get ice every day (does Canada not have block ice?) - which meant staying relatively near civilization. So when we started talking about our…
3 Comments
July 15, 2017. The truck has always had a bit of rake, with the rear being ~2-3” higher than the front. And I like it that way - it looks good. Until the constant weight of the bed rack and CVT, the combination of stock leafs, Deaver AALs, and air shocks that I installed as part of the suspension overhaul were working reasonably OK. “OK” because I’ve never been able to get the air shocks to hold pressure - they lose about 10lbs a day, so I’m constantly filling them (which is easier with the ARB compressor installed). But with…
4 Comments
June 18, 2017. As our excursions have been getting longer and more remote, I’ve started paying more attention to things like the amount of extra fuel and water we carry. It’s still nothing too extreme - 6 gallons of fuel (50-100 miles) and 6 gallons of water (several days). And for convenience of packing, I’ve switched over to Rotopax from the cheapo red plastic gas cans and 1-gallon milk jugs. Of course, even finding deals on Craigslist means that I’ve spent a small fortune on the containers. But, they look great and are relatively compact when a trip gets started……
Leave a Comment