TL;DR - it's time for a new windshield.
Leave a CommentCategory: Rig Reviews
September 30, 2019. It was another whirlwind of trips through August and September, with three more trips and 21 more nights now in the books: The Whipsaw Trail in BC, Canada, a trip with Pops to the California Sierra, and a nearly two-week adventure through Wyoming and Colorado. Of those, the two driving adventures both ended early due to mechanical failure of at least one vehicle on the trip, so without further ado, let's get into what's bound to be a stunning rig review! Seemingly solved from previous Rig Reviews Front ADS Reservoirs Too Close to Tires Unchanged / Still an…
7 Comments
Not technically my truck. Mine might be heavier.
TL;DR - the truck is heavy at 5800 lbs loaded, and I need to find a way to shed weight. That's now on the project list for this winter.
Leave a Comment
TL;DR - I have oil leaking from the transfer case where the front drive shaft attaches.
Leave a Comment
TL;DR - The skid plates are holding up, but the mounting strategy could have been better. For the 3rd time, I'm modifying it.
Leave a Comment
TL;DR - it's been about a year and my spherical bearings are getting squeaky; time to replace them.
Leave a Comment
TL;DR - Moving the resis to the top of the frame means there is no more rubbing and I have my turning radius back.
Leave a Comment
TL;DR - if you get cold hands/feet at night when it's cold outside, and would like to be warm and toasty in bed, these work great as long as they are exposed to air/moisture.
Leave a Comment
TL;DR - The rear axle seal replacement seems to worked beautifully and there is no more leaking at all.
Leave a Comment
TL;DR - the hard brakes lines are working fabulously and I'm happy to have installed them.
Leave a Comment
July 29, 2019. In perhaps our most-traveled month to date, July was nearly an entire month in Idaho. In fact, we've had four trips in the last couple of months to this tiny state - after only having visited once before. After our SE Idaho trip to Indian Hot Springs and City of Rocks, our trip to the Highest Roads in Idaho, and running the Idaho Backcountry Discovery route, there are definitely a few things worth mentioning on the rig. So let's get right down to it. Seemingly solved from previous Rig Reviews The Electrical System - now with moar…
7 Comments
TL;DR - Couldn't be happier. I was considering getting some CVJs to replace my CVs, but I don't think I will anymore.
Leave a Comment
TL;DR - The 12V power cord has a design flaw. ARB is good about standing behind their warranty however, and sent me a new one.
Leave a Comment
TL;DR - The wheels are awesome and the bronze is a great color IMO. It does not however hold up to brake fluid that sits on the paint for an extended period of time.
Leave a Comment
TL;DR - It's more valuable than I'd given it credit for. Mine is a little "sticky" going up and down - likely a result of how I store it.
Leave a Comment
TL;DR - The new rack works just fine, but I have no idea if it's preventing bed cracking until I take it off.
Leave a Comment
TL;DR - the dual battery system is working amazingly great. It was extremely nice to not have to worry about powering the fridge, even when the overnight temps were in the 50°F's.
Leave a Comment
TL;DR - If you don't carry a small 2'x3' door mat for the bottom of your tent ladder, or in front of your tent, you should. Keeps the tent clean and is a great mat to work on when something goes wrong with the truck.
Leave a Comment
TL;DR - One of my 13WL brake calipers seized on the trail and had to be replaced. The issue was that Napa no longer carries a workable caliper, and the 13WL caliper really wants a hard brake line connection, which Tacoma banjo bolts don't offer. I'll be switching out my lines.
Leave a Comment