January 3, 2018 When I got my Alcan leaf pack, I knew it was top quality. I really liked how the guys at Alcan asked what I wanted from the pack, as far as "every day" weight in the back, as well as "loaded" weight for adventures. So far, I've…
2 CommentsCategory: Tacoma Build
General catch-all category for content relating to 2000 Tacoma modifications.
December 6, 2017. Over the last 17 years, the truck has been amazing. Truly a joy every time I get in it, work on it, or even just get all googly-eyed looking at it. But, as we've started bigger and longer adventures, and turned it into an adventure truck as…
19 CommentsDecember 4, 2017. Having recently installed bigger-than-stock tires, it was of course clear that I needed to do something to get them to fit up front, even before I get my new wheels installed... I mean, they didn't rub when driving on perfectly level ground which was nice, but pair…
7 CommentsNovember 9, 2017 Having just installed a new ham radio setup to get APRS, I was keen to play with Kenwood TM-D710GA and Mobilinkd to track my location. So, on a few local trips, I turned everything on and waited. And waited and waited. Over the course of 30 minutes,…
2 CommentsNovember 5, 2017 It wasn't all that long ago that I got my Ham radio license and installed an Icom-5100 in the truck. A great radio, it's gone now - because a great radio isn't all I need; I need a great radio that can also do APRS. What's APRS…
20 CommentsNovember 1, 2017. I've always hated the A-pillars in my truck. Actually, it's the trim I hate. And I've hated it since I first tried (and failed) to remove it several years ago to run the wire for a microphone from my head unit up to the rearview mirror. See,…
1 CommentOctober 28, 2017 New brakes nearly installed, I waited anxiously to see how the replacement brake line that Steve @Wheeler's Off Road sent was mailed - was it fast, or would it be slow? It was great - he sent it 1-day and I had it Saturday morning. Not only…
Leave a CommentIf you're here looking for how to install Tundra 13WL or 13WE brakes on a 1st gen Tacoma, you can read how I did it on this particular day, but the more useful page for you will probably be this guide: Step by Step Tundra Brake Upgrade on a Tacoma…
4 CommentsSeptember 10, 2017. When I got the ham radio, my hope was that I'd just skip the whole CB thing. I mean, when you've got the real thing… 🙂 But, as it turns out (and let's be honest, I knew this when I installed the ham radio), a lot of…
4 CommentsJuly 23, 2017. Ham radio is for old guys. I must be getting old. As the truck has gotten more capable, and as we’ve started doing longer and more remote trips, I’ve started carrying more tools, extra parts, etc. in order to make (minor) road repairs - hopefully enough to…
2 CommentsJuly 22, 2017. It was July 8, 2017. I know because I will always remember the day @mrs.turbodb said, "You should just get a fridge for the truck." We'd just returned from our week-long trip to Canada with the little kiddo, where we'd pre-prepared and frozen many of our meals,…
3 CommentsJuly 15, 2017. The truck has always had a bit of rake, with the rear being ~2-3” higher than the front. And I like it that way - it looks good. Until the constant weight of the bed rack and CVT, the combination of stock leafs, Deaver AALs, and air…
4 CommentsJune 18, 2017. As our excursions have been getting longer and more remote, I’ve started paying more attention to things like the amount of extra fuel and water we carry. It’s still nothing too extreme - 6 gallons of fuel (50-100 miles) and 6 gallons of water (several days). And…
Leave a CommentMay 25, 2017. I’m not getting any younger, that’s for sure. It used to be that I could do all kinds of manual labor for 20 hours/day, wake up the next day, and do it all again. I’d hurt myself in some semi-major way and my body would heal itself…
Leave a CommentApril 2, 2017. Thousands of miles. How far have I travelled on washboard roads at full tire pressure? Definitely thousands of miles. Probably not ten thousand, but enough that I wish I’d have known how much better life is when you can air down and air back up without too…
Leave a CommentApril 2017. Wires everywhere. That’s how it’s starting to feel with the various accessories that I’ve added to the truck. Sure, I tuck them away here, and zip-tie them away there to try to clean things up, but in the end I still have several pair of wires running from…
Leave a CommentFebruary 14, 2017. You may recall that no too long ago I decided to purchase a CVT, and then of course realized that the truck would need a bed rack to attach said CVT. That led to my Millermatic 211 acquisition, and the realization that this bed rack was the…
Leave a CommentNovember 2016. Most of the time, modifications I make to the truck are firmly in the "meh" camp for @mrs.turbodb. I mean, she appreciates the results, but she'd really be just as happy without them. And, they generally garner at least some amount of teasing about how they aren't technically…
6 Comments