May 12, 2018. We all know how it goes - the list of things to do to the truck is so long that we have to prioritize. And often, that prioritization favors form over function. And from time to time, I've been as guilty of that as the next guy, for sure. But not this time. This time, I knew that I needed the function with the form, lest I do irreparable damage to the Tacoma. So, when I installed the dual swingout CBI rear bumper in January, I purchased a set of frame reinforcement plates at the same time from @cbi offroad…
8 CommentsTag: maintenance
Truck maintenance that's in some way notable.
It wasn't long ago that Dan (@drr), Mike (@Digiratus), Zane (@Speedytech7) and I got together at Dan's shop to do some work on Mike's steering rack and LCA's. That didn't go exactly as planned, but we all had a great time and when we hear Zane was going to be in town again, we knew right away that we should get together again - even if just to hang out. Of course, we all had a few little things we wanted to do to our trucks (isn't that always the case?) so we decided to meet up at Mike's this…
Leave a Comment
I was ready for adventure - running solo, I was returning to Death Valley, having only just wet my appetite on our first trip back in January. With 2500 miles to go, I knew I had a lot of driving ahead - but I was ready - or so I thought - when, less than 50 miles in, the Check Engine Light (CEL) came on. I've covered the details of the first hours of diagnosis in my Back to Death Valley trip report, so if you haven't read that (and are interested), I'd recommend starting there. The plan here is…
6 Comments
Our trip to The Maze was awesome. However, you may recall that near the end, we hit a whoops a little fast, which led to me peering under the truck a few times on the way home to try and determine what the god-awful shake was that we were feeling in the accelerator, seats, and - after 15 hours on the road - our bones. I wasn't able to figure it out on the drive home, but the next day I spent some more time under the truck and noticed two things: The rear diff pinion seal had started leaking…
1 Comment
March 24, 2018. "I feel sorry for anyone who needs a cam bolt sleeve in the Seattle area this weekend." said Mike @Digiratus as he and Zane @Speedytech7 walked in the door a little after 4:30pm. See, they'd just driven a 50-mile loop to get every last one they could find - since we were in the process of destroying all four of Mike's. But we are way ahead of ourselves. For several months, Dan @drr and Mike have been planning a shop day. Mike wanted to install a new set of W53377A Whiteline LCA bushings as well as a new steering rack…
Leave a Comment
With summer fast approaching, I decided that it'd be a good time to take a look at the skids - so I could clean up any rust, and repaint them for the season. I'm not sure how necessary that is - I mean, at 3/16" thick, these @relentlessfab plates would take quite a while for rust to destroy - but it's an easy process, so why not. Removal was straight forward though a bit unwieldy, and I was happy to find that my re-welded anchors were holding up well. I was also happy to see that my skids had saved…
Leave a Comment
I've never been a car guy. I can tell you all about the details of construction and woodworking - how the various bits of a house work, how to precision tune a saw or plane. But when I looked down and saw two flaking, worn bushings that were connected to "some bar" and my lower control arms, I wondered, "What the heck is that, and how screwed am I?" As it turns out, that was my stabilizer bar, and I wasn't really all that screwed at all. But I'm getting ahead of myself. See, the first thing I did was consult…
2 Comments
February 26, 2018. I always dread cleaning the bed of the truck. I don't mean sweeping or washing out the bed liner - I mean, I don't like that either - but the part I really dread is removing the bed liner and cleaning underneath it. There are a couple reasons for this: first, it's hard to get the liner out; it's really wedged in there (which is good the rest of the time). Second, I always worry (rightly, I think) that when I take out the bed liner, I'm going to see how it's destroyed my bed - rubbing off…
3 Comments
February 21, 2018. Not all that long ago, the truck got a gear change - from the 4.10 factory gears to 4.88's - meaning that it's now easier on the engine to turn the bigger tires as it climbs up hills, over rocks, and generally towards adventure. Within a couple weeks of the gear change, I'd driven far enough to get 500 miles of break-in complete on the rear diff and changed the oil - and everything there seemed A-OK, which was nice. And then on our trip to Death Valley, we ran as much as we could in 4WD…
2 Comments
February 21, 2018. I've had a rattle for a little over four months. I first heard it (I think), when returning from The De-Tour at the beginning of October, or else maybe a week or so after that. It sounded like a loose heat shield, or other piece of sheet metal, rattling away under the back half of the truck. But I knew it wasn't a heat shield - it only happened at speeds above about 15-20mph, and changed when under load (vs. coasting) and there were certain throttle/speed/terrain combinations where I could almost get it to go away. Of…
Leave a Comment
Fixing the IFS Skid Mounts January 14, 2018. "That's strange." I thought as the guys at JT's Parts and Accessories took my IFS Front Skid off to replace the gears in my front diff. "I don't remember the guys from @RelentlessFab putting any clips behind the middle bolts. I wonder how those help hold the skid on?" A couple hours later, the three of us realized that in fact, there were no clips installed by Relentless - rather, the OEM mounts had broken off! I probably shouldn't have been surprised - the skid is beefy at 3/16" thick, surely stronger…
Leave a Comment
Having travelled the requisite 500 miles to break in my new 4.88 gears (you may want to read "New Gears - 4.88's and an ARB front locker" and "the first 500 mile break-in" if you haven't already), it was high time to change the oil in the rear diff - hopefully uneventfully - to clean out any metal and other gunk that may have been present as a result of the break-in. Toyota conveniently calls for 90W oil in the differentials, and that's hard to come by - at least for me, locally - so I decided on Lucas 80W-90,…
Leave a Comment
September 09, 2017. With a low mile truck that's been stored in ideal (covered, underground) conditions it's entire life, maintenance for me has been minimal. With regular oil changes (done at the dealer until 2016) and services, I've pretty much done nothing. But the last couple years have seen more off-road use of the truck. And, knowing that more use means more maintenance, I've started learning to do things myself… because dealership maintenance is not cheap. So, I decided that my next order of business was going to be to grease my zerks. And I decided that because it's fun…
Leave a Comment
One of the things about starting to use the truck on more trips is that it ends up with a lot more miles. And more miles mean more frequent oil changes. In the past, I've always taken it to the Toyota dealer. I figured, "Why not, it's only $29, and then I don't have to worry about having the right tools, spending the time, and they'll do it best - with a lift, etc." Of course, what really happened was that they cross-threaded my OEM skids several times when they re-installed them (it's easier to change the oil if you…
Leave a Comment
June 12, 2016 Epic journey behind us, it was time to find out what was wrong with the engine and get it fixed. Step 1: Read the error code. To do that, I bought a Kiwi3 OBDII adapter and the DashCommand app. Error code P0131 - which in mechanic-speak is "bank 1 too lean" and in human is "dirty air intake." Side note: these two gadgets are an awesome combination. With them, it's like having a car from 2010 - instant fuel economy, average fuel economy, and all sorts of stats, coming directly from the computer. Sweet. Step 2: Fix…
Leave a Comment