escape the ordinary
Igor on the left, the Tacoma on the right.
TL;DR - To solve the problem with mud being flung everywhere with my SCS wheels that stuck out past the fender flares, I installed some new-to-me 1999 4Runner wheels on the truck, which sit under the fender flare. This solved the mud issue, but introduced a slight incompatibility with my new ADS front suspension - the tires rub on the shock reservoirs at full lock.
Leave a CommentWe slept well through the night - my only complaint really being that at 55º-60ºF, it was too warm and I woke up a bit sweaty somewhere around 2:00am. It was a simple enough fix to remove one of the comforters from my side, and I quickly fell back asleep until my sunrise alarm went off way too early. I wasn't sure exactly when sunrise was going to be, so I'd set the alarm for 5:15am. Turns out that 5:45am would have been a better time to catch the morning color. Perhaps a bit out of character, @mrs.turbodb was keen…
Leave a CommentOh man, was this going to be fun. A trip like no other (so far). A trip with a twist. A trip that was actually two. Let me explain. For a while now, Anza Borrego Desert State Park in California has been on my list of places to explore. Like Death Valley - which we've visited quite a bit and recently hiked for three days - it's a great place to visit during the winter because temperatures in the summer can get rather unbearable - so much so that certain roads in the park are closed from mid-June to September. The…
Leave a CommentI love the look of the SCS Stealth6 wheels that I've been running for the last 14 months. The dark bronze and six spokes are fantastic. Even the lug nuts are significantly better than OEM. And, as much as I hate to admit it, I really do like stance added to the truck by the 3.5" backspacing - having the wheels and tires pushed out a bit wider makes the truck look ready for anything. But, I can't stand the mud. That same backspacing that gives the truck a cool stance also pushes the tread of my 255/85R16 Cooper ST…
2 CommentsRig Review is a new type of post that I'm going to try to write up after most trips, where I'll note any things that worked really well, or could have been better. The idea has always been to optimize the Tacoma build and setup over time, so there's nothing really new from that perspective. I won't talk about everything I've got going on - just new equipment to the trip and/or any outliers that deserve a mention. At the very least, I figure that long-term, real-world reviews of the products I use are good for everyone! February 18, 2019.…
2 CommentsOur sleep was short-lived, the wind continuing to pick up as the night wore on. In fact, this chapter technically starts on February 15th, since it was 11:45pm when we awoke to the most violent shaking of the tent I've ever experienced - significantly more violent than the night I spent with Monte @Blackdawg and Mike @Digiratus at the base of the Henry Mountains in Utah. I'd already gotten up once to secure the ladder, tying it to a full 5-gallon jerry can of water and the slider of the truck to ensure that the fold-out half of the tent wouldn't make…
2 CommentsThe night passed much more peacefully than the one before and we slept extremely well on our new Exped Megamat Duo 10 - a great fit in the @cascadia tents Mt. Shasta, and significantly more comfortable than the foam mattress. Hoping for a dramatic sunrise, I was up early to explore camp. In the end, given our location in the pass - there wasn't much color in the sky, the weather seemed to be holding and the temps were warmer than the day before, and I was happy to explore the hilly area around camp to see what secrets it held.…
3 CommentsThe Day the Tent Closed...with Us Inside Before it even began, the trip was off to a rough start. See, we'd planned - if you can call deciding to go on a trip just a few days prior to departure, "planning" - to leave two weeks earlier, but inclement weather caused us to push the trip back. Even so, the weather report was iffy just a few days before the new date - something we decided we'd ignore so we could get out and explore. Plus, by pushing the date, we'd gotten a couple of friends - Ben @m3bassman, Zane @Speedytech7,…
6 CommentsJanuary 15, 2019. What can I say? It's the end of an era, sort of. Really, it's the end of a transition period for the Tacoma - a time when it was transitioning from daily driver and home renovation hauler to a more dedicated exploration vehicle. It was nearly three years ago that this transition started, one of my first modifications being a new Toytec BOSS lift in order to support the Relentless armor I was soon to install. Over the last three years, that @Toytec Lifts setup has done everything I could have asked of it. No, that's not right…
10 CommentsWith Christmas vacation in full swing, we've been having a great time. There are lots of new toys to play with around the house, there are activities to keep us busy during the day, and the newly introduced household chores - and associated weekly allowance - have @mini.turbodb in high spirits. Oh, to be eight years old. But, when @mrs.turbodb suggested that we get bundled up and head up into the mountains to get in some sledding and enjoy the snow, the child was having none of it. "I hate the snow, it's too cold." - The words spilled out…
2 CommentsDecember 29, 2018. I get asked by a lot of folks, some flavor of, "What do you pack when you go on a trip?" So, I thought it'd be a good time to run through what goes into the truck for an adventure. In fact, I think that a post once a year outlining the gear could be a great thing, so that's the plan. Oh, and taken with the Rig Reviews that I've started, it will give a good sense of what's working and what's not with the setup. So, without further ado, let's dig into what's on and…
Leave a Comment
Not only functional, but they look good too!
TL;DR - the ADS setup is working great. We didn't do much dirt travel this time, but what little we did do was no problem at all. More to come in the future.
Leave a Comment
Those are a lot of promises in one marketing picture.
TL;DR - if you ever feel like your RTT mattress leaves a little something to be desired, don't buy a foam topper to try to increase it's thickness. Get an Exped MegaMat Duo 10 LXW. You won't regret it even though it's pricey - this is the most comfortable sleeping experience I've ever had.
Leave a CommentPeople often assume that everything is easy for me. That I just go about doing things, and usually doing them well. That's sort of the case, since I've had a lot of experience doing different things in my life and I tend to pick things up quickly, but I think it's important to recognize that even for people who seem "good at everything," not everything is easy. Getting in there and trying things can still be both hard and rewarding, no matter who you are... I don't know why, but I've been super nervous about changing my spark plugs and…
4 CommentsDecember 17, 2018. I'm generally pretty good at building things with my hands, but in relocating the rear shocks on my first gen Toyota Tacoma, I'd royally screwed up. If you haven't read about that, I'd recommend checking out the previous post in this series - Rear Shock Relocation - Fabrication and Failure, where after I'd permanently welded a bunch of stuff to my truck, I'd discovered that I couldn't go over bumps taller than about 2-inches. Not good for adventuring out on dirt roads. But, failure is a great learning tool, and I'd spent some time figuring out why…
4 CommentsThe rain did seem to tail off sometime in the middle of the night, and the breeze did definitely continue on into the morning. All of this gave us hope that we'd climb out of the tent to a similar situation as the previous morning - overcast, but mostly dry. Nope. It was overcast alright, but it was also super foggy. I mean, it was a pea soup-type fog that really felt like more of a windy drizzle. The tent was soaked, and we decided that we didn't even really want to eat breakfast it was so wet out. Instead,…
8 CommentsExcited to test out the rear shock relocation I'd just completed with the help of Zane @Speedytech7, I headed north toward Las Vegas to pick up @mrs.turbodb who was flying in for a two-ish day trip along the Old Mojave Road - a historically significant trail through the Mojave National Preserve in southern California. Passenger acquired, we made a quick dinner pit stop at The Habit Burger - a place we'd never been before but had heard had amazing burgers at drastically low prices ($3.50). The burgers were actually quite good - I'd recommend them over any other fast-food burger -…
3 CommentsDecember 3-4, 2018. Rear shock relocation day was finally here! Zane @Speedytech and I were up bright and early so we could be at ADS right around their opening time of 8:00am to pick up the rear shocks they'd been holding for me for the last couple of months. As generally seems to be the case when it comes to truck parts stores, we were both like kids in a candy store as we ogled around the ADS facility. Definitely quite the setup they've got going on there! Tyler, who'd been helping me with my shocks, walked us around for…
Leave a CommentDecember 1-2, 2018. For years now I've run what I'd call "work shocks" in the rear of the truck. First a set of Gabriel Hi-Jackers that I put on to carry heavy loads, then a set of Monroe MaxAir MA820's (now replaced by the MA728 model) when I installed the rear lift - these shocks were great for carrying heavy loads since I could add air pressure to push the rear of the truck higher. But as truck use has changed to more exploration (perhaps even the overused "overlanding), it's become clear that the ride provided by these shocks is…
Leave a CommentIt was just a couple days ago that I noticed my front diff was leaking. Actually, I noticed it only because I was replacing my AC idler pulley for the second time in a month - having replaced it on The De-Tour last year and recently again with less than a week of the F.U. Rain trip remaining. I sure hope this time lasts longer than a week on the trail and a few muddy water crossings! But that's not what this post is about - this post is about my front diff. While I was under the truck with the…
4 Comments
