I was ready for adventure - running solo, I was returning to Death Valley, having only just wet my appetite on our first trip back in January. With 2500 miles to go, I knew I had a lot of driving ahead - but I was ready - or so I thought - when, less than 50 miles in, the Check Engine Light (CEL) came on. I've covered the details of the first hours of diagnosis in my Back to Death Valley trip report, so if you haven't read that (and are interested), I'd recommend starting there. The plan here is…
6 CommentsAdventureTaco Posts
"You should get a 4Runner." is what I tell just about anyone with kids who asks what kind of car they should get. Of course, nothing generally comes of that - people opt for something more racy - a Tesla, or an Audi, those kinds of things. So, you can imagine my surprise when Dave and Joe - a couple guys I worked with - each came home with a 4Runner and reached out to go "offroading"! Now that's cool. Naturally, I wanted their first dirt in their new trucks to be fun - how else would I get them…
2 Comments
April 14, 15, 2018. A couple hours after falling asleep just north of Saline Valley Warm Springs, I was awoken by what I initially thought was a gunshot in my dream. But, with the valley still echoing, I soon realized it was no dream. Unsure what was going on, I looked back towards the springs, to see how others were reacting. I saw no real reaction, but then a few minutes later, I heard a "thump-thump-thump" and saw streaks of light heading into the moonless sky. And then, light and explosions. Fireworks continued intermittently for the next 10-15 minutes. Ultimately,…
2 Comments
Having hit the sack relatively early (a drawback of being solo and not chatting into the evening around a fire), I was well-rested as I awoke to catch the sun chasing the moon on the eastern horizon. One of my favorite times of day, I climbed out of the tent and sent a mental message to the burros to shut the hell up. There were approximately 20 of them in the valley, and they'd been going at it all night. I found myself yearning for the last trip - where we'd not seen a single burro - clearly a blessing…
Leave a Comment
A Struggle from the Start If our first trip to Death Valley taught us anything, it was that our adventures there were far from complete. The three days of exploration had just scratched the surface of the vast wilderness before us. So, when I found out that @mrs.turbodb was headed out of town for a week, I was quick to make plans for a return trip. Going solo, my route did include a few of our favorite spots (Butte Valley and Goler Wash), but focused on several new areas as well - most outside of Death Valley proper (West Side…
Leave a Comment
April 2, 2018. A while back, I somehow stumbled on @jberry813's post where he installed a garage door opener in his headliner (Homelink in a 1st gen) near the map lights. Having the same issues - a garage door remote that floats around in the center console; @mrs.turbodb's car that has it built into the sun visors) - I decided that this was something I needed to do right away. That was a little over a year ago. Rightly, other mods took priority - and I'm glad they did. See, I never should have done this mod, but most other…
4 Comments
Our trip to The Maze was awesome. However, you may recall that near the end, we hit a whoops a little fast, which led to me peering under the truck a few times on the way home to try and determine what the god-awful shake was that we were feeling in the accelerator, seats, and - after 15 hours on the road - our bones. I wasn't able to figure it out on the drive home, but the next day I spent some more time under the truck and noticed two things: The rear diff pinion seal had started leaking…
1 Comment
March 24, 2018. "I feel sorry for anyone who needs a cam bolt sleeve in the Seattle area this weekend." said Mike @Digiratus as he and Zane @Speedytech7 walked in the door a little after 4:30pm. See, they'd just driven a 50-mile loop to get every last one they could find - since we were in the process of destroying all four of Mike's. But we are way ahead of ourselves. For several months, Dan @drr and Mike have been planning a shop day. Mike wanted to install a new set of W53377A Whiteline LCA bushings as well as a new steering rack…
Leave a Comment
March 18, 2018. To say it was one of the more blustery nights we've spent in the tent would be an understatement. Perched on the edge of the canyon wall, the rain fly was getting whipped around, and the tent was acting like a sail in the bed of the truck - shaking the entire truck to and fro. @mrs.turbodb asked if there was any chance we might roll backwards. "Not really," I said. (and then I proceeded to put my clothes back on and get out to chock the tires - you know, "just in case." We slept soundly…
1 Comment
March 17, 2018. Our night at the Doll House was the calmest of the trip. We all slept soundly and though we each awoke a different times, we all experienced a beautiful morning. Having nearly missed the orange horizon the morning before, I refrained from hitting the snooze button on my alarm, and I crawled out of the tent about half an hour before sunrise. Being up so early allowed me time to scout a reasonably good position to capture the magic light of morning, since I could see exactly where it was going to come over the horizon, and…
2 Comments
March 15, 2018. Day 0. As we pulled out of the parking lot in Idaho Falls, we were already late. See, the plan had been to show up at @cbi offroad fab when they opened at 8:00am, and have the new bumper install done by 10:00am so we'd have our choice of routes down to Hanksville, UT where we were meeting Ben @m3bassman and Zane @Speedytech7 for a three-day adventure into The Maze District in Canyonlands National Park. My hope was that we'd choose the scenic route, down 191 through Wyoming to get to our meet-up and first nights camp…
3 Comments
March 14-15, 2018. There is perhaps nothing that changes the look of a truck more than adding a swing-out rear bumper. Sure, you can argue for bigger tires or lift or a front bumper, but in my mind, none of those things compare to the entirely new footprint that a rear-swing-out brings, what with the spare tire and jerry can mounts that add two additional feet to the length of your truck. But as usual, I'm jumping into the middle of the story. Let's back up a bit. Since starting to really build out the truck for adventuring, I've known that…
6 Comments
With summer fast approaching, I decided that it'd be a good time to take a look at the skids - so I could clean up any rust, and repaint them for the season. I'm not sure how necessary that is - I mean, at 3/16" thick, these @relentlessfab plates would take quite a while for rust to destroy - but it's an easy process, so why not. Removal was straight forward though a bit unwieldy, and I was happy to find that my re-welded anchors were holding up well. I was also happy to see that my skids had saved…
Leave a Comment
I've never been a car guy. I can tell you all about the details of construction and woodworking - how the various bits of a house work, how to precision tune a saw or plane. But when I looked down and saw two flaking, worn bushings that were connected to "some bar" and my lower control arms, I wondered, "What the heck is that, and how screwed am I?" As it turns out, that was my stabilizer bar, and I wasn't really all that screwed at all. But I'm getting ahead of myself. See, the first thing I did was consult…
2 Comments
February 26, 2018. I always dread cleaning the bed of the truck. I don't mean sweeping or washing out the bed liner - I mean, I don't like that either - but the part I really dread is removing the bed liner and cleaning underneath it. There are a couple reasons for this: first, it's hard to get the liner out; it's really wedged in there (which is good the rest of the time). Second, I always worry (rightly, I think) that when I take out the bed liner, I'm going to see how it's destroyed my bed - rubbing off…
3 Comments
February 21, 2018. Not all that long ago, the truck got a gear change - from the 4.10 factory gears to 4.88's - meaning that it's now easier on the engine to turn the bigger tires as it climbs up hills, over rocks, and generally towards adventure. Within a couple weeks of the gear change, I'd driven far enough to get 500 miles of break-in complete on the rear diff and changed the oil - and everything there seemed A-OK, which was nice. And then on our trip to Death Valley, we ran as much as we could in 4WD…
2 Comments
February 21, 2018. How many miles do you have on your truck? If you're anything like me, you'll answer this by looking at your odometer, reading a number, and concluding that you have that many miles - 83,078 miles in my case. Like me, you're wrong. Your odometer is lying to you. And so is your speedometer. I covered why that is here - go read it. I'll wait. Speedometers, Odometers, and Gas Mileage – All Lies! OK, welcome back. Or not if you're like me and just skipped over that last link. Let me try to recap: The reading…
30 Comments
February 21, 2018. I've had a rattle for a little over four months. I first heard it (I think), when returning from The De-Tour at the beginning of October, or else maybe a week or so after that. It sounded like a loose heat shield, or other piece of sheet metal, rattling away under the back half of the truck. But I knew it wasn't a heat shield - it only happened at speeds above about 15-20mph, and changed when under load (vs. coasting) and there were certain throttle/speed/terrain combinations where I could almost get it to go away. Of…
Leave a Comment
February 13, 2018. Ever since installing the bed rack and CVT the truck has been in "adventure mode." I don't mind that so much when I'm just driving around (though - it'd be nice to not haul around the extra weight all the time), but it does make me nervous to park it unattended/unsecured overnight. As such, I've been trying to come up with a plan to remove the rack and RTT (ideally at the same time), and store them. In our barely-1-car garage. At any rate, I knew the solution was going to involve either a winch or pullies…
Leave a Comment
It's not uncommon to be asked the question: I'm about to upgrade my rear suspension. Should I get an AAL (add-a-leaf) or a whole new (possibly custom) leaf pack? Since there's never an easy answer, here's what I'd say... it depends. Actually, there are two easy answers: If your existing leaf pack is in reasonable shape and you're not regularly hauling heavy loads (several hundred pounds) in the back of your truck, go with the AAL. It'll give you a lifted look, will work fine for the occasional load, and will be the most economical option. If your existing (probably stock/original)…
3 Comments