May 8, 2017. The day is here, and it's a big one. It was over half a year ago that I decided I wanted a CVT, and in that time I'd purchased one and fabricated a bed rack that I hoped would work to hold it behind the cab of the truck. Naturally I'd gotten a good deal on the CVT, and had spent 10x more fabricating the rack (buying tools, etc.) than if I'd just purchased a pre-fabricated one. This day was also a big day because it was the start of a week-long camping trip where we'd meet…
2 CommentsAdventureTaco Posts
April 2, 2017. Thousands of miles. How far have I travelled on washboard roads at full tire pressure? Definitely thousands of miles. Probably not ten thousand, but enough that I wish I’d have known how much better life is when you can air down and air back up without too much hassle. Luckily, while I’m still cheap, I’ve smartened up over the years, and I know that some things are worth a little extra. And comfort is one of those things. So, it’s time to install an ARB CKMA12 air compressor. I’ve opted for the single compressor here rather than…
Leave a Comment
April 2017. Wires everywhere. That’s how it’s starting to feel with the various accessories that I’ve added to the truck. Sure, I tuck them away here, and zip-tie them away there to try to clean things up, but in the end I still have several pair of wires running from various fuses and relays in the engine compartment to accessories and switches on the truck. As someone who likes organization, it’s always bothered me. Luckily, there are solutions out there for those of us who like order. There are pre-made fuse boxes from folks like Blue Sea Systems, and there…
Leave a Comment
February 14, 2017. You may recall that no too long ago I decided to purchase a CVT, and then of course realized that the truck would need a bed rack to attach said CVT. That led to my Millermatic 211 acquisition, and the realization that this bed rack was the beginning of yet another expensive hobby (metalwork). Excited to get going, I started looking for bed rack designs. I wanted something that would support the CVT - both on the road as well as deployed would position the top of the CVT "in-line" with the top of the cab -…
Leave a Comment
Cutting down our own Christmas Tree has become a tradition in the last five years or so. We've got our favorite place to go ( off I-90 by Snoqualmie Pass), our favorite species of tree (Hemlock), and our favorite "dinner after" (Mexican). This year, only "dinner after" happened as planned. We've had colder than usual weather in the Seattle area for the last two weeks (highs in the low 30's), so we knew that there was a good chance we'd see a lot of snow on our hunt this year. But it's been clear for the last few days and…
Leave a Comment
November 2016. Most of the time, modifications I make to the truck are firmly in the "meh" camp for @mrs.turbodb. I mean, she appreciates the results, but she'd really be just as happy without them. And, they generally garner at least some amount of teasing about how they aren't technically necessary or how much money was spent (by which I mean, "if you give a mouse a cookie…") But this time was different. This time, there was a sparkle in her eyes. One of the first things I did to the truck in 1999 - six days after I brought…
8 Comments
One of our favorite places to get away in Washington is the Sleeping Lady resort in Leavenworth. It's great year-round, with hiking in the summer, snow in the winter, and amazing food (included in the nightly price) all the time. I've been itching to get away the last few weeks, and with rainy weather here for the next six months, we decided that we'd head to Sleeping Lady rather than on a camping/hiking trip. But, to make it a bit more of an adventure, I decided that we'd drive part of the way on the WABDR (WA Backcountry Discovery Route)…
Leave a Comment
October 18, 2016. I am a woodworker. For the last twenty years, metal (stock and shavings), oils, and dirt have been systematically removed from my shops - they can bring no good to wood projects. Metal can dull blades and stain wood as it rusts, oils can soak into the wood and make finishing near impossible, and dirt - well, no one ever said "Can you make that fine furniture a little dirtier?" (I take that back - some do - and I think it's crazy to "pre-distress" a piece.) But I've always been curious about metalwork. And I've always…
Leave a Comment
October 18, 2016. When I purchased the Sportz Truck Tent back in 2012 (see Sportz Truck Tent and Truck Bedzzz), I thought to myself, "Boy, I'm really living large and spending the big bucks now." The tent cost me $189 big ones, and the air mattress was another $90. I don't know if RTT's (Roof Top Tent's) like Cascadia Vehicle Tents existed then, but if they did, I didn't know about them and they would have been out of my price range. Today, I committed to really living large - I paid for a Mt. Shasta CVT - on sale…
Leave a Comment
One of the things about starting to use the truck on more trips is that it ends up with a lot more miles. And more miles mean more frequent oil changes. In the past, I've always taken it to the Toyota dealer. I figured, "Why not, it's only $29, and then I don't have to worry about having the right tools, spending the time, and they'll do it best - with a lift, etc." Of course, what really happened was that they cross-threaded my OEM skids several times when they re-installed them (it's easier to change the oil if you…
Leave a Comment
October 9, 2016. When the winch was installed, it was obviously wired right up to the battery - this made a lot of sense, since it was easy, allowed us to get it spooled up, and is of course the way Warn recommends installing it. But I wanted something better. Or at least more flexible. I wanted to have a way to disconnect the winch from the battery when it wasn't in use (just so I don't have a bunch of #2 AWG wire hot to the winch all the time, and I wanted a way to quickly hook up…
2 Comments
October 2, 2016. The day before we left for Crater Lake, the mid-skid had arrived - but I didn't have time to paint and install it before we took off. Not a big deal, since the IFS skid covers just as much as both stock plates. But of course, I wanted to get the mid-skid on just as soon as possible, so upon our return I figured some after-work cleanup and painting was in order. As expected, the unpainted skid had a bit of surface rust and dirt on it, so my first task after unboxing was to give both…
Leave a Comment
September 16-18, 2016. Belly protection on, it was time for some dirt roads. Back from India a Friday morning at 6:30am (again), we packed up the truck and headed to Crater Lake National Park in central Oregon. The idea was to get in some great sites, but also spend a day or so exploring the back roads, finding camp sites, and putting the truck through some paces. The drive down was long but easy. Waze and a podcast running on the JOYING, and a mid-day stop for Jimmy John's, we arrived at Crater Lake at 5pm, an experience not unlike…
Leave a Comment
September 2016. As an astute reader will recall, when the Relentless armor was installed, the skid plates were placed in the back of the truck. Actually, just one was placed in the back, since the second wasn't going to fit my truck - a California model with an extra catalytic converter. Upon getting the first skid home, I painted it immediately with a couple coats of Rustoleum professional enamel primer, and a few coats of flat black. Looked reasonably good. "I like the R," said @mini.turbodb. Then, I waited. I mean, I should put both skids on at once, I…
Leave a Comment
September 2016. When I initially mentioned to Dad that I was going to get a winch and plate bumper, he had two questions for me. How's that going to be for your gas mileage? You gonna get some more lights? Hella's or PIAA's? Little did he know that I'd already purchased some Hella 500's, and they were sitting in the dining room collecting dust. I mean, who wouldn't buy some Hella's, knowing that a new bumper was coming in 6 months, right? Plus, they were a great deal on Amazon (well, they were the same price as always). I ignored…
Leave a Comment
September 3, 2016. Ever since the truck was broken into in the alley, its place at night has been in the garage. That isn't simple, since the garage was built in 1925, and is only 1" longer than a stock 2000 Toyota Tacoma 4WD. I mean, I did have to sacrifice…by removing the tow hitch so it would fit. But with the new armor the truck was lengthened by 3½", due primarily to the Predator hoops on the front bumper. No problem I thought - we'll just knock out the front wall of the garage and go along our merry…
Leave a Comment
August 23, 2016. The trip was a long awaited one. But first, some background. The lead up Six months ago (Feb 2016), I'd decided it was finally time to get a winch on my Tacoma - to allow me to get out of jams (if I get in one); to increase safety on certain trails when we're out solo, and to open up new trails where a blow-down may need to be moved out of the way (for instance). Initially I was going to go with a hidden front hitch, and a winch that I could move to the front…
2 Comments
August 7, 2016. I've suffered enough. That Panasonic stereo I installed back in 2013 was great for the Bluetooth, and it was nice for playing videos, but the UI was just horrendous. I mean, why can't there be an option to just make the background black, and not some pulsating craziness that belongs in "The Fast-er-est and Furious-er-est," not a Toyota Tacoma? Plus, I'm getting to that point where I should just buy what I want - I mean, I've learned from Pops that I'm just spending @mini.turbodb's inheritance at this point, even if she did love the old stereo…
1 Comment
The trip started out on the iffy side. We wanted a beautiful weekend for a stunning hike, and instead it was raining, there was a faint hiss coming from the back left tire, and 20 miles up a Forest Service road I had no tire patch kit. But, a spare tire can be installed, and weather can change in 24 hours. And when that happens, you can end up with great camping - 25 miles up a Forrest Service road - and perhaps the most beautiful hike you've ever encountered...if you have a truck. (This is the North Cascades Pass…
Leave a Comment
July 2, 2016. It's been close for a while, and it's been a long time coming, but on our way out of town for a what would become an off-road adventure to a brand new site - the truck hit 60K miles. That's an average of 3,600 miles each year, or a whopping 300 miles per month. Except that I'd driven it 10K miles in the first two months, so it's really more like 200 miles per month over the life of the truck. This truck is going to last me forever. I hope. So we arrived at our super-secret-undisclosed-location-that-you-have-to-rush-to-or-someone-else-will-get-there-first,…
Leave a Comment